elektroenduro
SW-Motech's Legend Gear is made from state-of-the-art material with a classic style. This line has an ageless "retro" design using high-tech materials and a versatile fastening system. A combination of coated canvas sailing material and robust Napalon synthetic leather support the vintage design, whilst offering the toughness needed for daily use on the road.The Side Carriers SLC are bike specific and allow easy and safe mounting to original mounting points of the bike. Frames can be removed within seconds via the quick-lock system. System can be used with one or both sides installed Fastenings for accessory bags Please Note: Check Applications tab for correct bike fitmentIncludes: SLC Side Carriers For Left and Right Side LC2 Legend Gear Side Bag 13.5 Litres Left - Dimensions: 14 x 35 x 31 cm - Weight: 1.4 Kilos LC1 Legend Gear Side Bag 9.8 Litres Right - Dimensions: 14 x 31 x 26 cm - Weight: 1.2 Kilos Water proof inner bagsPlease Note: To get the best performance from your legend Gear luggage the manufacturer recommends applying a canvas waterproofing wax to maintain water resistance. Apply at regular intervals or after washing your luggage. Not only will your luggage remain water resistant it's classic ageless appearance will be enhanced.Optional:Accessory Bag: 0.8 (12x6x18 cm) and 1.2 (15x5x18 cm) litres. Perfect add-on for small items you like to easily access. Attach to most Legend Gear bags and are also compatible with Saddle Strap SLS and Tank Strap SLA. Military grade fastening system. Comes with circumferential zipper and rain cover.Smart Phone Bag: 0.8 (9.4x2.1x18 cm) Litres. Suitable for smart phones with a 5.5" display, comes with integrated bill pocket and 3 credit card size slots. Multi-touch compatible. Can be attached to most Legend Gear bags and is also compatible with Saddle Strap SLS and Tank Strap SLA.Shoulder Strap: 90 to 150 cm long / 3.8 cm wide. Offers shoulder padding and fastening loops for accessory bags. Can be attached to tail bags, saddle bags and tank bags.
SW-Motech's Legend Gear is made from state-of-the-art material with a classic style. This line has an ageless "retro" design using high-tech materials and a versatile fastening system. A combination of coated canvas sailing material and robust Napalon synthetic leather support the vintage design, whilst offering the toughness needed for daily use on the road.The Side Carriers SLC are bike specific and allow easy and safe mounting to original mounting points of the bike. Frames can be removed within seconds via the quick-lock system. System can be used with one or both sides installed Fastenings for accessory bags Please Note: Check Applications tab for correct bike fitmentIncludes: SLC Side Carriers For Left and Right Side LC2 Legend Gear Side Bag 13.5 Litres Left - Dimensions: 14 x 35 x 31 cm - Weight: 1.4 Kilos LC1 Legend Gear Side Bag 9.8 Litres Right - Dimensions: 14 x 31 x 26 cm - Weight: 1.2 Kilos Water proof inner bagsPlease Note: To get the best performance from your legend Gear luggage the manufacturer recommends applying a canvas waterproofing wax to maintain water resistance. Apply at regular intervals or after washing your luggage. Not only will your luggage remain water resistant it's classic ageless appearance will be enhanced.Optional:Accessory Bag: 0.8 (12x6x18 cm) and 1.2 (15x5x18 cm) litres. Perfect add-on for small items you like to easily access. Attach to most Legend Gear bags and are also compatible with Saddle Strap SLS and Tank Strap SLA. Military grade fastening system. Comes with circumferential zipper and rain cover.Smart Phone Bag: 0.8 (9.4x2.1x18 cm) Litres. Suitable for smart phones with a 5.5" display, comes with integrated bill pocket and 3 credit card size slots. Multi-touch compatible. Can be attached to most Legend Gear bags and is also compatible with Saddle Strap SLS and Tank Strap SLA.Shoulder Strap: 90 to 150 cm long / 3.8 cm wide. Offers shoulder padding and fastening loops for accessory bags. Can be attached to tail bags, saddle bags and tank bags.
SW-Motech's Legend Gear is made from state-of-the-art material with a classic style. This line has an ageless "retro" design using high-tech materials and a versatile fastening system. A combination of coated canvas sailing material and robust Napalon synthetic leather support the vintage design, whilst offering the toughness needed for daily use on the road.The Side Carriers SLC are bike specific and allow easy and safe mounting to original mounting points of the bike. Frames can be removed within seconds via the quick-lock system. System can be used with one or both sides installed Fastenings for accessory bags Please Note: Check Applications tab for correct bike fitmentIncludes: SLC Side Carriers For Left and Right Side LC2 Legend Gear Side Bag 13.5 Litres Left - Dimensions: 14 x 35 x 31 cm - Weight: 1.4 Kilos LC1 Legend Gear Side Bag 9.8 Litres Right - Dimensions: 14 x 31 x 26 cm - Weight: 1.2 Kilos Water proof inner bagsPlease Note: To get the best performance from your legend Gear luggage the manufacturer recommends applying a canvas waterproofing wax to maintain water resistance. Apply at regular intervals or after washing your luggage. Not only will your luggage remain water resistant it's classic ageless appearance will be enhanced.Optional:Accessory Bag: 0.8 (12x6x18 cm) and 1.2 (15x5x18 cm) litres. Perfect add-on for small items you like to easily access. Attach to most Legend Gear bags and are also compatible with Saddle Strap SLS and Tank Strap SLA. Military grade fastening system. Comes with circumferential zipper and rain cover.Smart Phone Bag: 0.8 (9.4x2.1x18 cm) Litres. Suitable for smart phones with a 5.5" display, comes with integrated bill pocket and 3 credit card size slots. Multi-touch compatible. Can be attached to most Legend Gear bags and is also compatible with Saddle Strap SLS and Tank Strap SLA.Shoulder Strap: 90 to 150 cm long / 3.8 cm wide. Offers shoulder padding and fastening loops for accessory bags. Can be attached to tail bags, saddle bags and tank bags.
Sportsters -1200 Custom., Forty-Eight., Icon 883., Roadster 883., Roadster 1200.,Superlow. SW-Motech's Legend Gear is made from state-of-the-art material with a classic style. This line has an ageless "retro" design using high-tech materials and a versatile fastening system. A combination of coated canvas sailing material and robust Napalon synthetic leather support the vintage design, whilst offering the toughness needed for daily use on the road.The Side Carriers SLC are bike specific and allow easy and safe mounting to original mounting points of the bike. Frames can be removed within seconds via the quick-lock system. System can be used with one or both sides installed Fastenings for accessory bags Please Note: Check Applications tab for correct bike fitmentIncludes: SLC Side Carriers For Left and Right Side LC2 Legend Gear Side Bag 13.5 Litres Left - Dimensions: 14 x 35 x 31 cm - Weight: 1.4 Kilos LC1 Legend Gear Side Bag 9.8 Litres Right - Dimensions: 14 x 31 x 26 cm - Weight: 1.2 Kilos Water proof inner bagsPlease Note: To get the best performance from your legend Gear luggage the manufacturer recommends applying a canvas waterproofing wax to maintain water resistance. Apply at regular intervals or after washing your luggage. Not only will your luggage remain water resistant it's classic ageless appearance will be enhanced.Optional:Accessory Bag: 0.8 (12x6x18 cm) and 1.2 (15x5x18 cm) litres. Perfect add-on for small items you like to easily access. Attach to most Legend Gear bags and are also compatible with Saddle Strap SLS and Tank Strap SLA. Military grade fastening system. Comes with circumferential zipper and rain cover.Smart Phone Bag: 0.8 (9.4x2.1x18 cm) Litres. Suitable for smart phones with a 5.5" display, comes with integrated bill pocket and 3 credit card size slots. Multi-touch compatible. Can be attached to most Legend Gear bags and is also compatible with Saddle Strap SLS and Tank Strap SLA.Shoulder Strap: 90 to 150 cm long / 3.8 cm wide. Offers shoulder padding and fastening loops for accessory bags. Can be attached to tail bags, saddle bags and tank bags.
Strong and durable Shark ATV/UTV plow.Great snow moving capacity and superior snow roll-over performance.Plow with universal adapterFeatures: 59"/150 cm width Weight: 42 kg Durable construction with reinforcing ribs Spring-loaded blade to reduce impact forces if hard object is hit For plowing of snow and other loose materials such as soil, coal, gravel, sand, mulch, etc. For electric winch lift (winch not included) Including adjustable heavy-duty skids New heavy duty packaging
Specifically developed for sports bikes and smaller street bikes. The rack is ideal for strapping soft luggage to it, especially in combination with the Street Rack Luggage Rack Extension. Without the use of tools, an adapter plate can be fitted, which allows installation of SW-Motech or other manufacturer's hard cases. Please Note: Check Applications tab for correct bike fitment High precision CNC production process Suitable for T-Ray Top cases, SysBag 15/30 and also for cases from GIVI, Krauser and Shad (adapter kits are sold separately) Simple installation to the original mounting points of the bike Made from low weight, durable 5 mm aluminium alloy Colour: Black, powder coated Included: Street Rack Mounting Equipment Mounting instructions Optional: Street Rack Extension: The perfect addition to any SW-Motech Street rack, when carrying soft luggage, which is wider and needing additional support. (45 cm x 30 cm). Installs within seconds.
Specifically developed for sports bikes and smaller street bikes. The rack is ideal for strapping soft luggage to it, especially in combination with the Street Rack Luggage Rack Extension. Without the use of tools, an adapter plate can be fitted, which allows installation of SW-Motech or other manufacturer's hard cases. High precision CNC production process Suitable for T-Ray Top cases, SysBag 15/30 and also for cases from GIVI, Krauser and Shad (adapter kits are sold separately) Simple installation to the original mounting points of the bike Made from low weight, durable 5 mm aluminium alloy Colour: Black, powder coated Weight: 3.6 kilosIncluded: Street Rack Mounting Equipment Mounting instructionsOptional: Street Rack Extension: The perfect addition to any SW-Motech Street rack, when carrying soft luggage, which is wider and needing additional support. (45 cm x 30 cm). Installs within seconds.
The TraX Advenutre sets a new benchmark in aluminium touring cases. They are designed to be extremely tough and made from 1.5 mm aluminium, further strengthened by lid and side wall ribbed contours. With a weight of between 4.6 and 5.4 kilos, the TraX Adventure is one of the lightest cases available in it's class.The robot welded body easily withstands water and dust alike. Punch riveted plastic elements avoid perforation of the wall material, which results in no weak spots for moisture ingress being created. Even rivets and screws have been designed to withstand all weather and riding conditions. Easy to use latches and anodized carrying handles make luggae handling a real treat.Features: Made from powder coated anodised aluminium with a wall thickness of 1.5 mm Easy to clean surface Includes lid restricting rope Four sturdy tie-down points have been integrated into the lids' corners Corner protectors are made from reinforced fiber glass Stainless steel latches Mounts to SW-Motech Quick-Lock side carriers Adapter kits available for different carrier systems 38 L capacity Dimensions: 41 x 34 x 33 cm Weight: Approximately 4.6 kgIncluded: TraX Adventure aluminium touring case, anodized Pre-installed mounting rail for adapter plate Lid restricting rope Carry bagPlease Note:The 2-set locking cylinders are required for the top case set-up. One for securing the box to the adapter plate and one to lock the case. (If purchasing a complete side case and top case set-up, only one 6-set of locking cylinders is required) An adapter plate / kit is required (to be selected from drop down list) to mount a TraX top case to SW-Motech rear racks Alu Rack - Adapter Plate GPT.00.152.400 Steel Rack - Adapter Kit GPT.00.152.20201 Adventure Rack - Adapter Kit GPT.00.152.35100 Street Rack - Adapter Plate GPT.00.152.54100/BOptional: TraX Top Box Inner Bag: Removable inner bag (textile) with two compartments. Ideal when you don't want to de-mount your box, but want to remove the contents of your case. Suitable for TraX cases 38 Litre top boxes. TraX Gear+ Lid Net: Highly flexible net, which mounts to fixation points inside TraX Adv 38 litre top cases. Allows you to store items you wish to have at hand as soon as you open the case. TraX Adventure Top Box Backrest: Made from foam rubber, the backrest provides a more comfortable seating position for pillion passengers.
SW-MOTECH has specially manufactured this centerstand for the BMW F 850 GS with BMW lowering!The indestructible, yet lightweight steel tube construction offers the best angle and ground clearance, makes it easy to jack up and provides stability - whether it's during maintenance or on the road. In most cases, you will no longer need to buy an additional swing arm stand. During long downtimes in the winter months, the centerstand helps take the load off your tires. For models with BMW lowering Stands securely when traveling with lots of luggage and during maintenance Bike-specific design for easy mounting and high cornering clearance Easy to lift up the motorcycle Outrigger for optimal leverage Best corrosion resistance due to sand blasting and powder coating of the surface Made of robust steelIncluded in delivery: 1 x Centerstand Mounting instructions Mounting materialDetails: Material: Steel Surface: powder coated Color: black Total Weight: appr. 3,1 kg / appr. 6.8 lbNote: For models with BMW lowering
Centerstand Honda CRF1000L Africa Twin (15-21). The indestructible, yet lightweight steel tube construction offers the best angle and ground clearance, makes it easy to jack up and provides stability - whether it's during maintenance or on the road. In most cases, you will no longer need to buy an additional swing arm stand. During long downtimes in the winter months, the centerstand helps take the load off your tires. Stands securely when traveling with lots of luggage and during maintenance Bike-specific design for easy mounting and high cornering clearance Easy to lift up the motorcycle Outrigger for optimal leverage Best corrosion resistance due to sand blasting and powder coating of the surface Made of robust steelIncluded in delivery 1 x Centerstand Mounting instructions Mounting materialDetails Material: Steel Surface: powder coated Color: black Total Weight: appr. 3,3 kg / appr. 7.2 lb
Centerstand Honda CRF1000L Africa Twin Adventure Sports (18-21). The indestructible, yet lightweight steel tube construction offers the best angle and ground clearance, makes it easy to jack up and provides stability - whether it's during maintenance or on the road. In most cases, you will no longer need to buy an additional swing arm stand. During long downtimes in the winter months, the centerstand helps take the load off your tires. Stands securely when traveling with lots of luggage and during maintenance Bike-specific design for easy mounting and high cornering clearance Easy to lift up the motorcycle Outrigger for optimal leverage Best corrosion resistance due to sand blasting and powder coating of the surface Made of robust steelIncluded in delivery 1 x Centerstand Mounting instructions Mounting materialDetails Material: Steel Surface: powder coated Color: black Total Weight: appr. 3,4 kg / appr. 7.4 lb
The indestructible, yet lightweight steel tube construction offers the best angle and ground clearance, makes it easy to jack up and provides stability - whether it's during maintenance or on the road. In most cases, you will no longer need to buy an additional swing arm stand. During long downtimes in the winter months, the centerstand helps take the load off your tires. Stands securely when traveling with lots of luggage and during maintenance Bike-specific design for easy mounting and high cornering clearance Easy to lift up the motorcycle Outrigger for optimal leverage Best corrosion resistance due to sand blasting and powder coating of the surface Made of robust steelIncluded in delivery: 1 x Centerstand Mounting instructions Mounting materialDetails: Material: Steel Surface: powder coated Color: black Total Weight: appr. 5,2 kg / appr. 11.4 lb
The indestructible, yet lightweight steel tube construction offers the best angle and ground clearance, makes it easy to jack up and provides stability - whether it's during maintenance or on the road. In most cases, you will no longer need to buy an additional swing arm stand. During long downtimes in the winter months, the centerstand helps take the load off your tires. Stands securely when traveling with lots of luggage and during maintenance Bike-specific design for easy mounting and high cornering clearance Easy to lift up the motorcycle Outrigger for optimal leverage Best corrosion resistance due to sand blasting and powder coating of the surface Made of robust steelIncluded in delivery: 1 x Centerstand Mounting instructions Mounting materialDetails: Material: Steel Surface: powder coated Color: black Total Weight: appr. 2,7 kg / appr. 5.9 lb
This kit contains all parts required to easily and securely mount the EVO fog lights on the crash bar. The crash bar clamps allow the fog lights to be mounted on crash bars with various pipe diameters.The particularly wide light scatter of the EVO fog lights ensures that you better "see and be seen" in fog or in poor weather. Safety in road traffic is therefore increased. SW-MOTECH sought out a reliable partner for the development of the new EVO fog lights and relied on the expertise of a long-standing top manufacturer from the automotive sector.The focus of the new development was on a compact shape and fulfilling the highest quality standards: the EVO fog lights are water- and dust-tight and protection class IP69. Powerful LEDs provide the best view, while wear-resistant housings ensure long life.Crash bar clamps for EVO lights For mounting on crash bars or other vehicle parts with the corresponding diameter For SW-MOTECH EVO lights Includes rubber inserts for adapting to 22/25.4/26/27 mm and 28 mm. Made from fiberglass-reinforced polyamideDetails Material: Polyamide Color: black Total Weight: appr. 0,2 kg / appr. 0.5 lbEVO Fog lights Trouble- and maintenance-free operation due to almost wear-free LED, considerably reduced energy consumption Compact size with a diameter of 7.1cm Water- and dustproof (safety class: IP69) Voltage: 12 V; cable harness for easy connection to the motorcycle battery is included, no change to motorcycle electric required Splash-proof and illuminated handlebar switch for easy operation Lights have an ECE test mark (ECE R19 F3) Power: 12 W / luminous flux: 1,050 LM Splash-proof and bright green handlebar switch for convenient operation Mounting points on all four sides Installation on headlight clamps for crash bar (Ø 22, 26, 27, 28 mm) or bike-specific bracketsDetails Material: Aluminum Surface: powder coated Color: black Size: 7,1 x 7,1 cm / 2.8 x 2.8 in Total Weight: appr. 1,3 kg / appr. 2.9 lbNote Note that due to the curvature of the reflector the "TOP" mark must always be at the top. Please observe the legal regulations applicable in your country for the operation and installation of fog lights.Required for mounting Crash bar clamps or model-specific light mount available separately.
This kit contains all parts required to easily and securely mount the EVO fog lights on the crash bar. The crash bar clamps allow the fog lights to be mounted on crash bars with various pipe diameters.The particularly wide light scatter of the EVO fog lights ensures that you better "see and be seen" in fog or in poor weather. Safety in road traffic is therefore increased. SW-MOTECH sought out a reliable partner for the development of the new EVO fog lights and relied on the expertise of a long-standing top manufacturer from the automotive sector.The focus of the new development was on a compact shape and fulfilling the highest quality standards: the EVO fog lights are water- and dust-tight and protection class IP69. Powerful LEDs provide the best view, while wear-resistant housings ensure long life.Trouble- and maintenance-free operation due to almost wear-free LED, considerably reduced energy consumption Power output: 12 W Luminous flux: 1050 LM ECE test mark: ECE R113 Rev.2 Highly concentrated beam with long-distance range Compact size with a diameter of 7.1cm Water- and dustproof (safety class: IP69) Voltage: 12 V. Cable harness for easy connection to the motorcycle battery included in delivery, no change to motorcycle electric required Splash-protected, blue glowing handlebar switch for comfortable operation (Protection class: IPX4) Mounting points on all four sides Installation on headlight clamps for crash bar (Ø 22, 26, 27, 28 mm) or bike-specific bracketsIncluded in delivery 2 x EVO High beams Mounting instructions Mounting materialDetails Material: Aluminum Surface: powder coated Color: black Total Weight: appr. 1,3 kg / appr. 2.9 lbNote Note that due to the curvature of the reflector the "TOP" mark must always be at the top. Light clamps for crash bar and bike-specific mounts are available separately. Please observe the legal regulations applicable in your country for the operation and installation of high beamsRequired for mounting Crash bar clamps or bike-specific light mount
The highly concentrated light of the EVO high beams has a particularly wide range. This provides optimal lighting for the rider's view and ensures safety during on- or off-road riding. SW-MOTECH sought out a reliable partner for the development of the new EVO fog lights and relied on the expertise of a long-standing top manufacturer from the automotive sector. Development is focused on meeting the strictest quality standards while also maintaining a compact shape: the EVO high beams are resistant to water and dust, with an IP69 protective class rating. Powerful LEDs provide the best view, while wear-resistant housings ensure long life.Trouble- and maintenance-free operation due to almost wear-free LED, considerably reduced energy consumption Power output: 12 W Luminous flux: 800 LM ECE test mark: ECE R113 Rev.2 Highly concentrated beam with long-distance range Compact size with a diameter of 7.1cm Water- and dustproof (safety class: IP69) Voltage: 12 V. Cable harness for easy connection to the motorcycle battery included in delivery, no change to motorcycle electric required Splash-protected, blue glowing handlebar switch for comfortable operation (Protection class: IPX4) Mounting points on all four sides Installation on headlight clamps for crash bar (Ø 22, 26, 27, 28 mm) or bike-specific bracketsIncluded in delivery 2 x EVO High beams Mounting instructions Mounting materialDetails Material: Aluminum Surface: powder coated Color: black Total Weight: appr. 1,3 kg / appr. 2.9 lbNote Note that due to the curvature of the reflector the "TOP" mark must always be at the top. Light clamps for crash bar and bike-specific mounts are available separately. Please observe the legal regulations applicable in your country for the operation and installation of high beamsRequired for mounting Crash bar clamps or bike-specific light mount
The extensions are made from impact-resistant plastic allows you to increase the protective area of the Adventure handguards. The extension is attached to the top edge of the handguard shells with two screws. It blends in seamlessly and offers your hands more protection from wind and the elements.The solid crash pads made from PP impact-resistant plastic provide the Adventure handguards with additional protection in the event of falls and, in conjunction with the aluminum brackets and the Adventure handguard shells, ensure even more robust and reinforced protection. The crash pads are placed exactly at the point where the motorcycle first comes into contact with the ground in the event of a fall. The robust and abrasion-resistant material protects both the handguard shells and the aluminum bracket in an emergency. The crash pads, which match the design of the Adventure handguard shells, further emphasise the Adventure look. If necessary, damaged crash pads can be easily replaced.Features Easy mounting to the Adventure hand protector shells due to precise design Colour: Black Weight: 0.1 Kilos Please Note: Not compatible with KOBRA or Barkbusters handguardsIncluded Crash Pads for left and right side Mounting instructions Mounting Material
The TraX Advenutre sets a new benchmark in aluminium touring cases. They are designed to be extremely tough and made from 1.5 mm aluminium, further strengthened by lid and side wall ribbed contours. With a weight of between 4.6 and 5.4 kilos, the TraX Adventure is one of the lightest cases available in it's class.The robot welded body easily withstands water and dust alike. Punch riveted plastic elements avoid perforation of the wall material, which results in no weak spots for moisture ingress being created. Even rivets and screws have been designed to withstand all weather and riding conditions. Easy to use latches and anodized carrying handles make luggae handling a real treat.Features: Made from anodised aluminium with a wall thickness of 1.5 mm Easy to clean surface Includes lid restricting rope Four sturdy tie-down points have been integrated into the lids' corners Corner protectors are made from reinforced fiber glass Stainless steel latches Mounts to SW-Motech Quick-Lock side carriers Adapter kits available for different carrier systems 38 L capacity Dimensions: 41 x 34 x 33 cm Weight: Approximately 4.6 kgIncluded: TraX Adventure aluminium touring case, anodized Pre-installed mounting rail for adapter plate Lid restricting rope Carry bagPlease Note:The 2-set locking cylinders are required for the top case set-up. One for securing the box to the adapter plate and one to lock the case. (If purchasing a complete side case and top case set-up, only one 6-set of locking cylinders is required) An adapter plate / kit is required (to be selected from drop down list) to mount a TraX top case to SW-Motech rear racks Alu Rack - Adapter Plate GPT.00.152.400 Steel Rack - Adapter Kit GPT.00.152.20201 Adventure Rack - Adapter Kit GPT.00.152.35100 Street Rack - Adapter Plate GPT.00.152.54100/B Optional: TraX Top Box Inner Bag: Removable inner bag (textile) with two compartments. Ideal when you don't want to de-mount your box, but want to remove the contents of your case. Suitable for TraX cases 38 Litre top boxes. TraX Gear+ Lid Net: Highly flexible net, which mounts to fixation points inside TraX Adv 38 litre top cases. Allows you to store items you wish to have at hand as soon as you open the case. TraX Adventure Top Box Backrest: Made from foam rubber, the backrest provides a more comfortable seating position for pillion passengers.
The well known EVO cases have undergone a make-over and have become the ION range. The improved cases are still excellent value for money and an alternative to the top of the range Adventure cases.Features: Light in weight, but durable with a wall thickness of 1.5 mm Waterproof due to robot-guided welding, punch rivet technology and exchangeable gaskets Latch buckles are made from stainless steel Made from aluminium, black powder coated Weight: 4.6 kilos Size: 41 x 34 x 33 cm Volume: 38 LitresPlease Note: The 2-set locking cylinders are required for the top case set-up. One for securing the box to the rear rack and one to lock the case. (If purchasing a complete side case and top case set-up, only one 6-set of locking cylinders is required) An adapter plate / kit is required (to be selected from drop down list) to mount a TraX top case to SW-Motech rear racks Alu Rack - Adapter Plate GPT.00.152.400 Steel Rack - Adapter Kit GPT.00.152.20101 Adventure Rack - Adapter Kit GPT.00.152.35100 Street Rack - Adapter Plate GPT.00.152.54100/B Optional: TraX Top Case Inner Bag: Removable inner bag (textile) with one large compartment. Ideal when you don't want to de-mount your box, but want to remove the contents of your case. Dimensions: 39x31x31 cm Lid Restricting Rope (Set of Two): Provides more stability when opening lid, which has additional luggage attached. Pillion Back Rest: Made for TraX ION top cases. Ensures a more comfortable seating position for the pillion rider.
Dual Zone Controller ATV Heated Grips w/ Thumbwarmer, with ODI Clamp-On system, power level memory, LED control light with adjustable intensity, multiple mounting options, 2x 20W. Symtec, the leader in heat performance technology, has now opened up a line of products designed to help you ride longer into the cold months or just longer into the cold nights. Heat Demon uses proprietary heating technology to give you the right amount of heat right at your finger tips. All products, whether it is heated grips or apparel, come with everything needed to keep off the cold and last as long as the ride. On the trails, on the road, on the job. Symtec ATV Heated Grip Kit was designed to keep your hands and thumbs warm while riding or working in cold weather, with an easy-to-install grip and thumb-warmer kit that uses no adhesives to install. LED with adjustable intensity for day or night operation. The control unit has multiple mounting options and will shut off automatically after two hours to save your battery life.Features: 2 heated accessories: heated grips and thumbwarmer 2 independent controls sharing 1 LED display and set up buttons in a very compact package Dual-Zone Controller let's you select your thumb and grip heat levels independently Each accessory can be set at any of 5 power levels Microprocessor and thermister feedback loop keeps the grip heat at your desired level regardless of voltage variation or ambient conditions Settings stay in memory after shut down Two easy to install heated grips with Lock-on ODI system LED with adjustable intensity for day or night operation Maximum: 40 W (20 W per Grip) @ 14 V Fast warm-up All necessary hardware and wiring included Total Weight: appr.0.44 kg
Buy the complete Set and SAVE. This takes the guess work out of buying luggage for your Tenere 700, as everything is included and you are ready for your next adventure once you have installed this kit. In addition to SW-Motech's Pro Side Carriers you also get two of the new SysBag WP Large, adapter plates and fitting kit. Feature of Pro Side Carriers Following on from SW-Motech's Quick-Lock side carriers, is the new Pro Side Carrier. Still removable, but even more robust. Made from 2.5 mm strong steel, the carriers mount even closer to the bike. And the functional drill holes anable mounting of RotopaX cells (adapter available separetly) and other acceccories. Fully removable, with newly developed, more robust quick-release fasteners Optional anti-theft protection available For permanent mounting, quick-release fasteners can be replaced with optional hard bolt kit Suitable for TraX, SysBags, GIVI/Kappa, Krauser, Hepco & Becker and Shad cases with use of appropriate fitting kit, which can be purchased separately Black powder coated surface Total Weight: appr. 6,2 kg / appr. 13.7 lb Width of side carriers installed to bike (without bags attached) 57 cm Features of SysBag WP Made from TPU material Attaches to the left PRO or EVO side carrier or to SW-MOTECH racks with the included adapter plate 100% waterproof main compartment Roll-top made of 210 Ripstop TPU MOLLE system for attaching accessory bags Reinforced handles Reflective details for better visibility Lashing eyelets for attaching cable locks Velcro fasteners to fix the excess belt lengths The adapter plate's quick lock system guarantees that the SysBag WP will be held securely by the side carrier The adapter plate attaches easily to the back of SysBag WP bags using the straps SysBag WP Details Material: TPU Color: black Size: 48,0 x 22,0 x 41,0 cm / 18.9 x 8.7 x 16.1 in Total Weight: appr. 4,3 kg / appr. 9.4 lb Total Volume: 27,0-40,0 l Features of Adapter SysBag Adapter Plate Mounts to SW-Motech PRO and EVO Side carriers For attachment to SW-Motech SysBag WP Quick-Lock system allows for easy removal, but at the same time guarantees a secure hold of the bag to side carriers Adapter plates are available for left and right hand side / for SysBag WP S / M / L Made from powder coated aluminium Colour: Black Total Weight: appr. 1,3 kg / appr. 2.9 lb Included in delivery: 2 x PRO Side carrier 2 x Adapter kit for SysBag WP 1 x Adapter plate left for SysBag WP L 1 x Right adapter plate for SysBag WP L 2 x SysBag WP L Mounting instructions Mounting materialOptional: Anti Theft Device: We recommend you protect your side carriers from theft with the anti theft device, which locks the frames to your bike. Bolt Adapter Kit: The bolt adapter kit replaces the Quick-Lock adapters and allows for the SW-Motech Pro Side Carriers to be mounted "permanently" to the bike, which adds strength and rigidity. Recommended for rough off-road riding. Tool Tube: Why not add this tool tube for safe storage of your spares and tools while you are on the road. It's made from robust plastic and is fitted with a rubber sealing inside screw cap. Mounts to the inside of your side carrier. Outer Dimensions: 30.5 cm length (34 cm length incl. mounting bracket) x 10 cm diameter (11 cm including mounting bracket) Inner Dimensions: 30 cm length x 8 cm diameter
SW-Motech's new waterproof SysBag range is sure to impress. Perfect for your next adventure. With it's maximum capacity of 23 Litres SysBag WP M is the medium size bag in the range. Bags are made from TPU material and the roll top from 21D Ripstop TPU. The intergraded MOLLE system allows for attachment of additional accessory bags. The inner bag is removable and two re-positionable dividers allow for separation of luggage if needed. Please Note: Read fitting instructions under Downloads tab for detailed information on mounting to side carriers and strapping to rear racks
Tear, tensile, puncture & impact resistance and most importantely this bag is waterproof. Made from welded Tarpaulin, it's perfect for all weather conditions and suitable for most bikes. The new arrangement of the straps allows easy combination with other Drybag models on the passenger seat or the rack. Thanks to their simple design, the new Drybags perfectly fit to the waterproof SysBag WP bags and the WP tank bags from the PRO line.Features: Dimensions: 58 cm length, 28 cm in diameter Capacity: 35 litres Reflective details 4 Point attachment system Roll top closure with Velcro and compression straps to ensure an effective dust and waterproof seal Shoulder carry strap included Multiple dry bags can be mounted on top of each other Colour: Grey Total Weight: appr. 1,2 kg / appr. 2.5 lbOptional Accessories: Luggage Cable Lock 180 cm: Ideal accessory for securing rear bags, tank bags, helmets and jackets to your bike. Number lock combination can be re-set
Weather-proof tail and carrying bag in one: The lightweight Drybag is available in two sizes and can be attached easily to the rear rack, passenger seat or other Drybags. Extremely durable, totally waterproof and highly UV resistant: our dry bags are made from durable 500D polyester with double-sided coating and are especially popular with motorcycle travelers who expose their luggage to extreme stress during a tour. These practical rolls are ideal in all weather conditions, are easy to clean and are worth the money. Made from welded Tarpaulin, it's perfect for all weather conditions and suitable for most bikes.Features: Dimensions: 50 cm length, 26 cm in diameter Capacity: 26 litres Reflective details 4 Point attachment system Roll top closure with Velcro and compression straps to ensure an effective dust and waterproof seal Shoulder carry strap included Multiple dry bags can be mounted on top of each other Colour: Grey Total Weight: appr. 1,2 kg / appr. 2.5 lbOptional Accessories: Luggage Cable Lock 180 cm: Ideal accessory for securing rear bags, tank bags, helmets and jackets to your bike. Number lock combination can be re-set