elektroenduro

We have taken the guess work out of ordering a rear luggage set-up for your bike. Everything you need is included in this kit. Included are SW-Motech's top of the range TraX Adventure case, an Adventure Rack, mounting hardware and 2 keys / cylinder locks. Sets are available in black and silver.Top Case features:    Robust and waterproof aluminium top case with fiber-reinforced plastic corners    High degree of stability due to design stamping and welded edges    Robot-guided welding and self-piercing riveting prevent dampness from penetrating into the case    Protection against oxidation and abrasion due to powder coating (black cases) and anodizing (silver cases)    Easy to clean surface    Lid with quick-release fastener and lid limiter    Hinges are made from stainless steel, handles are made from anodized aluminium    Lid has 4 large tie-down point    Made from: Aluminium    Weight: 4.8 kilos    Measurements: 41 x 34 x 33 cm    Volume: 38 LitresAlu Rack Features:    Laser cut and CNC formed from high-strength aluminium alloy    Effective corrosion protection, due to powder coated surface    Suitable for soft and hard luggage    0.6mm thicknessIncluded:    TraX Adventure top case    Lock set, 2 matching locks    Lid limiters    Top case mounting kit    Alu Rack    Mounting material    Mounting instructionsOptional Accessories:   TraX Gear+ Lid Net: The highly flexible net mounts to fixation points inside the lid of the Adventure case and allows you to store items you wish to have at hand as soon as you open the case. Size: 20x24 cm    TraX Inner Bag: Keep your luggage organised with this padded inner bag. Large carry handles allow for easy removal of the bag form the top case. Size: 39 x 31 x 31 cm    Back Rest: Two piece back rest made from foam rubber, offering a comfortable seating position for the pillion

We have taken the guess work out of ordering a rear luggage set-up for your bike. Everything you need is included in this kit. Included are SW-Motech's top of the range TraX Adventure case, an Adventure Rack, mounting hardware and 2 keys / cylinder locks. Sets are available in black and silver. Note: Check Applications tab for correct bike fitment.Top Case features:    Robust and waterproof aluminium top case with fiber-reinforced plastic corners    High degree of stability due to design stamping and welded edges    Robot-guided welding and self-piercing riveting prevent dampness from penetrating into the case    Protection against oxidation and abrasion due to powder coating (black cases) and anodizing (silver cases)    Easy to clean surface    Lid with quick-release fastener and lid limiter    Hinges are made from stainless steel, handles are made from anodized aluminium    Lid has 4 large tie-down point    Made from: Aluminium    Weight: 4.8 kilos    Measurements: 41 x 34 x 33 cm    Volume: 38 LitresAlu Rack Features:    Laser cut and CNC formed from high-strength aluminium alloy    Effective corrosion protection, due to powder coated surface    Suitable for soft and hard luggage    0.6mm thicknessIncluded:    TraX Adventure top case    Lock set, 2 matching locks    Lid limiters    Top case mounting kit    Alu Rack    Mounting material    Mounting instructionsOptional Accessories:   TraX Gear+ Lid Net: The highly flexible net mounts to fixation points inside the lid of the Adventure case and allows you to store items you wish to have at hand as soon as you open the case. Size: 20x24 cm    TraX Inner Bag: Keep your luggage organised with this padded inner bag. Large carry handles allow for easy removal of the bag form the top case. Size: 39 x 31 x 31 cm    Back Rest: Two piece back rest made from foam rubber, offering a comfortable seating position for the pillion

For models BMW R1200GS LC Adv/ R1250GS Adv (13-20). with orig. BMW stainless steel tubular rack.If rear, Top luggage storage is required, everything you need is included in this kit.Included are SW-Motech's top of the range TraX Adventure case, an Adventure Rack, mounting hardware and 2 keys / cylinder locks. Sets are available in black and silver.Top Case features:    Robust and waterproof aluminium top case with fiber-reinforced plastic corners    High degree of stability due to design stamping and welded edges    Robot-guided welding and self-piercing riveting prevent dampness from penetrating into the case    Protection against oxidation and abrasion due to powder coating (black cases) and anodizing (silver cases)    Easy to clean surface    Lid with quick-release fastener and lid limiter    Hinges are made from stainless steel, handles are made from anodized aluminium    Lid has 4 large tie-down point    Made from: Aluminium    Total Weight: appr. 4,8 kg / appr. 10.6 lb    Measurements: 41 x 34 x 33 cm    Volume: 38 LitresAdventure Rack Features:    Extremely robust rack for long distance touring and off-road rides    Manufacturing process and the optimised shape result in extra stability of the rack    Simple installation process to original mounting points of the bike    Made of light, but robust 4 mm thick aluminium alloy    Black powder coated and therefore protected from corrosionIncluded:   TraX Adventure top case    Lock set, 2 matching locks    Lid limiters    Top case mounting kit    Adventure Rack    Mounting material    Mounting instructionsOptional Accessories:   TraX Gear+ Lid Net: The highly flexible net mounts to fixation points inside the lid of the Adventure case and allows you to store items you wish to have at hand as soon as you open the case. Size: 20x24 cm    TraX Inner Bag: Keep your luggage organised with this padded inner bag. Large carry handles allow for easy removal of the bag form the top case. Size: 39 x 31 x 31 cm    Back Rest: ALK.00.732.10200/B Two piece back rest made from foam rubber, offering a comfortable seating position for the pillion

For models BMW R1200GS LC Adv/ R1250GS Adv (13-20). with orig. BMW stainless steel tubular rack.If rear, Top luggage storage is required, everything you need is included in this kit.Included are SW-Motech's top of the range TraX Adventure case, an Adventure Rack, mounting hardware and 2 keys / cylinder locks. Sets are available in black and silver.Top Case features:    Robust and waterproof aluminium top case with fiber-reinforced plastic corners    High degree of stability due to design stamping and welded edges    Robot-guided welding and self-piercing riveting prevent dampness from penetrating into the case    Protection against oxidation and abrasion due to powder coating (black cases) and anodizing (silver cases)    Easy to clean surface    Lid with quick-release fastener and lid limiter    Hinges are made from stainless steel, handles are made from anodized aluminium    Lid has 4 large tie-down point    Made from: Aluminium    Total Weight: appr. 4,8 kg / appr. 10.6 lb    Measurements: 41 x 34 x 33 cm    Volume: 38 LitresAdventure Rack Features:    Extremely robust rack for long distance touring and off-road rides    Manufacturing process and the optimised shape result in extra stability of the rack    Simple installation process to original mounting points of the bike    Made of light, but robust 4 mm thick aluminium alloy    Black powder coated and therefore protected from corrosionIncluded:    TraX Adventure top case    Lock set, 2 matching locks    Lid limiters    Top case mounting kit    Adventure Rack    Mounting material    Mounting instructionsPLEASE NOTE:    This set is for installation with OEM plastic luggage rack. Does not fit with OEM stainless steel rack    If the the OEM luggage rack isn't installed, lowering kit GPT.07.782.19100/B is required, which can be selected from the related product section below. Optional Accessories:   TraX Gear+ Lid Net: The highly flexible net mounts to fixation points inside the lid of the Adventure case and allows you to store items you wish to have at hand as soon as you open the case. Size: 20x24 cm    TraX Inner Bag: Keep your luggage organised with this padded inner bag. Large carry handles allow for easy removal of the bag form the top case. Size: 39 x 31 x 31 cm    Back Rest: ALK.00.732.10200/B Two piece back rest made from foam rubber, offering a comfortable seating position for the pillion

Everything close at hand: Papers or rain suit at the ready when they are stored in the lid net of the TRAX ADV top case. Our aluminium cases offer plenty of storage ? and prove that the right interior design matters, so you have clear and easy access to the case contents. The lid net, available for the top case and side cases of the TRAX ADV series, is a proven solution. The highly flexible net is simply hung from the inside of the lid and you immediately have easily accessible extra storage at your disposal.    Lid net for TRAX ADV top case    Quick attachment to stops in the lid    Material: Highly flexible, braided elastic band    Lid net dimensions for 37 litre side case M: 12 x 28 cm    Lid net dimensions for 45 litre side case L: 20 x 28 cm    Lid net dimensions for 38 litre top case M: 20 x 24 cmIncluded in delivery:    1 x TRAX ADV top case lid netDetails:    Total Weight: appr. 0,1 kg / appr. 0.1 lb

All accessories you need for a side case set-up are included in this kit. TEST WINNER in the magazine MOTORRAD issue 05/2020. Test result: VERY GOOD You get SW-Motech top of the range TraX Adventure side cases, a set of tough Pro side carriers, key cylinders, fitting kit, anti-theft device and even a key chain, which make a functional little tool.The cases are welded, made from 1.5 mm aluminium and are waterproof. Lids have build in carry handles and tie-down points. Sets are available in black and silver.Features of Pro Side Carriers:    Fully removable with newly developed more robust quick-release fasteners    Drill Holes enable mounting of Rotopax cells (adapter available separately)    Made from 2.5 mm strong steel, constructed for positioning close to the bike    For "permanent" mounting, quick-release fastener can be replaced with optional hard bolt kit, which can be ordered via the related product section at the bottom of this screen    Black powder coated surface    Mounting and demounting happens within seconds due to quick fasteners    Rear width with mounted carriers, but without cases: 510 mm Features of TraX Adventure Side Cases: Tough and waterproof aluminium case    Fiber-Reinforced plastic corners    Robot welding and punch riveting prevent moisture ingress    Cases are anodized (silver design) or powder coated (black design) against oxidation and abrasion    Completely removable lid with quick release fastener    4 tie-down points, integrated into the lid corners    Stainless steel latches, anodized aluminium handles    Pre-installed mounting rails serve as a strengthening frame    Waterproof seal can be replaced    Weight: 45 Litre Case: 5.4KG - 37 Litre Case: 5.1KG    Dimensions: 45 Litre Case: 49 x 28 x 37 cm - 37 Litre Case: 49 x 23 x 37 cm Included:    TraX Adventure Side Case 37L Right    TraX Adventure Side Case 45L Left    Pro Side Carriers    Fitting Kit    Lid Limiters    6 Locks / Cylinders    Anti Theft Device    Key Chain: Functional Tool    Mounting material    Mounting instructionsOptional Accessories:TraX Gear+ Lid Net: The highly flexible net mounts to fixation points inside the lids of the Adventure cases and allows you to store items you wish to have a hand as soon as you open the cases. Size: 37L Case: 12 x 28cm, 45L Case: 20 x28 cmTraX Gear+ Inner Bag: Keep your luggage organised with the padded inner bag. Large carry handles allow for easy removal of the bag from the top case. The bag can be used for any side case with dimensions from 48 x 20 x 33 cm to 48 x 25 x 33 cm. Bag expands via zipTraX Inner Lid Bag: The padded lid inner bag is made from tear-resistant 600D polyster and has different compartments, perfect for storing documents and other personal items you like to have in one place and available reach when you open your TraX caseTraX Expansion Bag: Need more luggage space? Add these waterproof expansion bags, which mount to the top of TraX cases, but also other manufacturer's cases, like BMW. The bags have a carry handle and an inner storage dvider. Size: 45 x 22 x 15 cm, 15 L capacity

All accessories you need for a side case set-up are included in this kit. TEST WINNER in the magazine MOTORRAD issue 05/2020. Test result: VERY GOODYou get SW-Motech top of the range TraX Adventure side cases, a set of tough Pro side carriers, key cylinders, fitting kit, anti-theft device and even a key chain, which make a functional little tool.The cases are welded, made from 1.5 mm aluminium and are waterproof. Lids have build in carry handles and tie-down points. Sets are available in black and silver.Features of Pro Side Carriers:    Fully removable with newly developed more robust quick-release fasteners    Drill Holes enable mounting of Rotopax cells (adapter available separately)    Made from 2.5 mm strong steel, constructed for positioning close to the bike    For "permanent" mounting, quick-release fastener can be replaced with optional hard bolt kit, which can be ordered via the related product section at the bottom of this screen    Black powder coated surface    Mounting and demounting happens within seconds due to quick fasteners    Rear width with mounted carriers, but without cases: 510 mmFeatures of TraX Adventure Side Cases:    Tough and waterproof aluminium case    Fiber-Reinforced plastic corners    Robot welding and punch riveting prevent moisture ingress    Cases are anodized (silver design) or powder coated (black design) against oxidation and abrasion    Completely removable lid with quick release fastener    4 tie-down points, integrated into the lid corners    Stainless steel latches, anodized aluminium handles    Pre-installed mounting rails serve as a strengthening frame    Waterproof seal can be replaced    Weight: 45 Litre Case: 5.4KG - 37 Litre Case: 5.1KG    Dimensions: 45 Litre Case: 49 x 28 x 37 cm - 37 Litre Case: 49 x 23 x 37 cmIncluded:    TraX Adventure Side Case 37L Left    TraX Adventure Side Case 45L Right    Pro Side Carriers    Fitting Kit    Lid Limiters    6 Locks / Cylinders    Anti Theft Device    Key Chain: Functional Tool    Mounting material    Mounting instructionsOptional Accessories:TraX Gear+ Lid Net: The highly flexible net mounts to fixation points inside the lids of the Adventure cases and allows you to store items you wish to have a hand as soon as you open the cases. Size: 37L Case: 12 x 28cm, 45L Case: 20 x28 cmTraX Gear+ Inner Bag: Keep your luggage organised with the padded inner bag. Large carry handles allow for easy removal of the bag from the top case. The bag can be used for any side case with dimensions from 48 x 20 x 33 cm to 48 x 25 x 33 cm. Bag expands via zipTraX Inner Lid Bag: The padded lid inner bag is made from tear-resistant 600D polyster and has different compartments, perfect for storing documents and other personal items you like to have in one place and available reach when you open your TraX caseTraX Expansion Bag: Need more luggage space? Add these waterproof expansion bags, which mount to the top of TraX cases, but also other manufacturer's cases, like BMW. The bags have a carry handle and an inner storage dvider. Size: 45 x 22 x 15 cm, 15 L capacity

TraX Adventure Side Case Sets save you 5-10% in comparison to buying individual componentsAll accessories you need for a side case set-up are included in this kit. You get SW-Motech top of the range TraX Adventure side cases, a set of tough Pro side carriers, key cylinders, fitting kit, anti-theft device and even a key chain, which make a functional little tool.The cases are welded, made from 1.5 mm aluminium and are waterproof. Lids have build in carry handles and tie-down points. Sets are available in black and silver.Features of Pro Side Carriers:    Fully removable with newly developed more robust quick-release fasteners    Drill Holes enable mounting of Rotopax cells (adapter available separately)    Made from 2.5 mm strong steel, constructed for positioning close to the bike    For "permanent" mounting, quick-release fastener can be replaced with optional hard bolt kit, which can be ordered via the related product section at the bottom of this screen    Black powder coated surface    Mounting and demounting happens within seconds due to quick fasteners    Rear width with mounted carriers, but without cases: 550 mmFeatures of TraX Adventure Side Cases:   Tough and waterproof aluminium case    Fiber-Reinforced plastic corners    Robot welding and punch riveting prevent moisture ingress    Cases are anodized (silver design) or powder coated (black design) against oxidation and abrasion    Completely removable lid with quick release fastener    4 tie-down points, integrated into the lid corners    Stainless steel latches, anodized aluminium handles    Pre-installed mounting rails serve as a strengthening frame    Waterproof seal can be replaced    Weight: 45 Litre Case: 5.4KG - 37 Litre Case: 5.1KG    Dimensions: 45 Litre Case: 49 x 28 x 37 cm - 37 Litre Case: 49 x 23 x 37 cmIncluded:    TraX Adventure Side Case 45L Left    TraX Adventure Side Case 37L Right    Pro Side Carriers    Fitting Kit    Lid Limiters    6 Locks / Cylinders    Anti Theft Device    Key Chain: Functional Tool    Mounting material    Mounting instructionsOptional Accessories:TraX Gear+ Lid Net: The highly flexible net mounts to fixation points inside the lids of the Adventure cases and allows you to store items you wish to have a hand as soon as you open the cases. Size: 37L Case: 12 x 28cm, 45L Case: 20 x28 cmTraX Gear+ Inner Bag: Keep your luggage organised with the padded inner bag. Large carry handles allow for easy removal of the bag from the top case. The bag can be used for any side case with dimensions from 48 x 20 x 33 cm to 48 x 25 x 33 cm. Bag expands via zipTraX Inner Lid Bag: The padded lid inner bag is made from tear-resistant 600D polyster and has different compartments, perfect for storing documents and other personal items you like to have in one place and available reach when you open your TraX caseTraX Expansion Bag: Need more luggage space? Add these waterproof expansion bags, which mount to the top of TraX cases, but also other manufacturer's cases, like BMW. The bags have a carry handle and an inner storage dvider. Size: 45 x 22 x 15 cm, 15 L capacity

All accessories you need for a side case set-up are included in this kit.TEST WINNER in the magazine MOTORRAD issue 05/2020. Test result: VERY GOOD You get SW-Motech top of the range TraX Adventure side cases, a set of tough Pro side carriers, key cylinders, fitting kit, anti-theft device and even a key chain, which make a functional little tool.The cases are welded, made from 1.5 mm aluminium and are waterproof. Lids have build in carry handles and tie-down points. Sets are available in black and silver.Features of Pro Side Carriers:    Fully removable with newly developed more robust quick-release fasteners    Drill Holes enable mounting of Rotopax cells (adapter available separately)    Made from 2.5 mm strong steel, constructed for positioning close to the bike    For "permanent" mounting, quick-release fastener can be replaced with optional hard bolt kit, which can be ordered via the related product section at the bottom of this screen    Black powder coated surface    Mounting and demounting happens within seconds due to quick fasteners    Rear width with mounted carriers, but without cases: 510 mmFeatures of TraX Adventure Side Cases:   Tough and waterproof aluminium case    Fiber-Reinforced plastic corners    Robot welding and punch riveting prevent moisture ingress    Cases are anodized (silver design) or powder coated (black design) against oxidation and abrasion    Completely removable lid with quick release fastener    4 tie-down points, integrated into the lid corners    Stainless steel latches, anodized aluminium handles    Pre-installed mounting rails serve as a strengthening frame    Waterproof seal can be replaced    Weight: 45 Litre Case: 5.4KG - 37 Litre Case: 5.1KG    Dimensions: 45 Litre Case: 49 x 28 x 37 cm - 37 Litre Case: 49 x 23 x 37 cmIncluded:    TraX Adventure Side Case 37L Left    TraX Adventure Side Case 45L Right    Pro Side Carriers    Fitting Kit    Lid Limiters    6 Locks / Cylinders    Anti Theft Device    Key Chain: Functional Tool    Mounting material    Mounting instructionsOptional Accessories:TraX Gear+ Lid Net: The highly flexible net mounts to fixation points inside the lids of the Adventure cases and allows you to store items you wish to have a hand as soon as you open the cases.Size: 37L Case: 12 x 28cm, 45L Case: 20 x28 cmTraX Gear+ Inner Bag: Keep your luggage organised with the padded inner bag. Large carry handles allow for easy removal of the bag from the top case. The bag can be used for any side case with dimensions from 48 x 20 x 33 cm to 48 x 25 x 33 cm. Bag expands via zipTraX Inner Lid Bag: The padded lid inner bag is made from tear-resistant 600D polyster and has different compartments, perfect for storing documents and other personal items you like to have in one place and available reach when you open your TraX caseTraX Expansion Bag: Need more luggage space? Add these waterproof expansion bags, which mount to the top of TraX cases, but also other manufacturer's cases, like BMW. The bags have a carry handle and an inner storage dvider. Size: 45 x 22 x 15 cm, 15 L capacity

All accessories you need for a side case set-up are included in this kit. TEST WINNER in the magazine MOTORRAD issue 05/2020. Test result: VERY GOOD You get SW-Motech top of the range TraX Adventure side cases, a set of tough Pro side carriers, key cylinders, fitting kit, anti-theft device and even a key chain, which make a functional little tool.The cases are welded, made from 1.5 mm aluminium and are waterproof. Lids have build in carry handles and tie-down points. Sets are available in black and silver.Features of Pro Side Carriers:    Fully removable with newly developed more robust quick-release fasteners    Drill Holes enable mounting of Rotopax cells (adapter available separately)    Made from 2.5 mm strong steel, constructed for positioning close to the bike    For "permanent" mounting, quick-release fastener can be replaced with optional hard bolt kit, which can be ordered via the related product section at the bottom of this screen    Black powder coated surface    Mounting and demounting happens within seconds due to quick fasteners    Rear width with mounted carriers, but without cases: 510 mm Features of TraX Adventure Side Cases: Tough and waterproof aluminium case    Fiber-Reinforced plastic corners    Robot welding and punch riveting prevent moisture ingress    Cases are anodized (silver design) or powder coated (black design) against oxidation and abrasion    Completely removable lid with quick release fastener    4 tie-down points, integrated into the lid corners    Stainless steel latches, anodized aluminium handles    Pre-installed mounting rails serve as a strengthening frame    Waterproof seal can be replaced    Weight: 45 Litre Case: 5.4KG - 37 Litre Case: 5.1KG    Dimensions: 45 Litre Case: 49 x 28 x 37 cm - 37 Litre Case: 49 x 23 x 37 cm Included:    TraX Adventure Side Case 37L Right    TraX Adventure Side Case 45L Left    Pro Side Carriers    Fitting Kit    Lid Limiters    6 Locks / Cylinders    Anti Theft Device    Key Chain: Functional Tool    Mounting material    Mounting instructionsOptional Accessories:TraX Gear+ Lid Net: The highly flexible net mounts to fixation points inside the lids of the Adventure cases and allows you to store items you wish to have a hand as soon as you open the cases. Size: 37L Case: 12 x 28cm, 45L Case: 20 x28 cmTraX Gear+ Inner Bag: Keep your luggage organised with the padded inner bag. Large carry handles allow for easy removal of the bag from the top case. The bag can be used for any side case with dimensions from 48 x 20 x 33 cm to 48 x 25 x 33 cm. Bag expands via zipTraX Inner Lid Bag: The padded lid inner bag is made from tear-resistant 600D polyster and has different compartments, perfect for storing documents and other personal items you like to have in one place and available reach when you open your TraX caseTraX Expansion Bag: Need more luggage space? Add these waterproof expansion bags, which mount to the top of TraX cases, but also other manufacturer's cases, like BMW. The bags have a carry handle and an inner storage dvider. Size: 45 x 22 x 15 cm, 15 L capacity

Ideal for longer tours: The two-piece backrest made of foam rubber provides a more comfortable sitting position for your travel companion.The lower backrest with a large contact surface and the upper portion on the edge of the lid offer an extra dose of sitting comfort. You can still mount additional luggage to the top case, as the shape of the backrest does not interfere with the mounting points.The backrests are attached with self-sealing screws. The screws and a drilling template are included in delivery.    Lower backrest provides a large contact surface on the top case front    Additional comfort is provided by the second, upper backrest on the lid edge    Included in delivery is a drilling template to facilitate installation    Self-sealing screws are included in delivery    Material: foam rubberIncluded in delivery    1 x Upper passenger backrest    1 x Lower passenger backrest    1 x Drilling template    Mounting instructions    Mounting materialDetails    Material: rubber    Color: black    Total Weight: appr. 0,6 kg / appr. 1.3 lb

Keep your luggage organized with a TraX Gear+inner bag. Suitable for SW-Motech TraX ION and Adventure side cases, but can also be used for any other side case. The bag can be adjusted to fit both 37 and 45 litres cases via a zipper expansion. Large carrying handles support easy unloading from the side case and allow for it to be used as a carry bag.An additionally integraded smaller pocket can serve as a storage compartment for wallet, phone or documents. The bottom of the bag is fitted with anti-slip material.  The luggage can also be used in other cases ranging in size from 48 x 20 x 33 centimeters to 48 x 25 x 33 centimeters (length/width/height). Included in delivery:      1 x TRAX M/L inner bag Details:     Material: 600D polyester     Color: black Total     Weight: appr. 0,6 kg / appr. 1.3 lb     Total Volume: 37,0-45,0 l     Size: 48 x 20 x 33 cm to 48 x 25 x 33 cm

Ideal for longer tours: the backrest made of EPS rigid foam ensures a more comfortable sitting position for your traveling companion. Backrest TraX ION by SW-Motech       Backrest made of EPS rigid foam      Ensures more comfortable sitting position for the passenger      Tailored for TRAX ION top case (not for TRAX ADV) Included:       1 x TRAX ION top case passenger backrest      Mounting instructions      Mounting material

One key for nine locks - With this lock set you can easily operate all locks on your TRAX aluminum cases with just one key.The TRAX lock set with anti-theft protection includes three locks for locking the case lid, three additional locks for locking the case to the side carriers, a lock for the tool box and two anti-theft systems with locks for EVO side carriers. All nine locks are matching. Two keys are also included. The lock set is suitable for all aluminum cases from the TRAX ADV and TRAX ION series.      9 matching locks       With anti-theft protection for EVO side carriers       Compatible with side cases and top cases from the TRAX ADV and TRAX ION series       One key for all locks Included:      7 x Locks for cases       2 x Locks with anti-theft protection for EVO side carriers       2 x keys Mounting instructions Mounting material      Mounting instructions      Mounting material Details      Total Weight: appr. 0,5 kg / appr. 1.0 lb

We also offer crash bars made of steel pipe with a 27 mm diameter with a weather- and corrosion-resistant powder coating in black for the Triumph Trident 660. The surface finishing is carried out in a state-of-the-art facility in the SW-MOTECH factory in the Czech city of Brünn.Constructed of heavy-duty mild steelDesigned to provide maximum protectionAll components are protected against corrosion by sandblasting and powdercoatingHigh-strength frame mounting points.Optical integration, and high-quality fit and finishTube diameter: 27 mmColour: BlackTotal Weight: appr. 2,9 kg / appr. 6.4 lbOptional Extra:Light Mounts for Crash Bars: NSW.00.004.13000/B Made for EVO Fog and High Beam Lights, but other manufacturers lights may fit as well. Suitable for crash bar diameter 22 - 28 mm.Fog lamps: NSW.00.490.10001 EVO Universal 12 W / luminous flux: 1050 LM

Our universal kit offers a variety of different mounting options on the motorcycle: the 1-inch ball provided can be mounted on an M6 or M8 thread, mirror thread holder or a mounting clamp. The mounting clamp is designed for handlebars with a diameter of 22.28 mm or 1 in. A pivoted socket arm makes positioning in the cockpit easy - so the display always remains in plain sight, without obstructing instrument view. The T-Lock holder with smartphone mount is included in delivery and allows you to quickly attach smartphones to the Universal Navi kit. The T-Lock holder can be secured to the socket arm with a quarter turn clockwise. The silicone straps on the smartphone mount are used to attach devices of different sizes.For smartphones with maximum external dimensions of 165 x 80 x 12 mm and minimum external dimensions of 144 x 71 x 7 mm    T-Lock holder for quick attachment to the socket arm    Smartphone mount with silicone straps    Balls and 2" socket allow for individual positioning    Socket can be pivoted in two axes up to 90° or 45°    The 1-inch ball can be mounted on an M6 or M8 thread, mirror thread holder or a mounting clamp    Mounting clamp for handlebars with a diameter of 22 mm, 28 mm or 1 inchIncluded in delivery:    1 x Universal mounting clamp with rubber inserts    1 x Ball with M8 thread and M6 converter    1 x Support for attaching mirror thread    1 x 2" socket arm    1 x Ball joint with mounting plate    1 x  T-Lock holder for smartphone    Mounting instructions    Mounting materialDetails:    Total Weight: appr. 0,5 kg / appr. 1.0 lb

    Constructed of robust steel with a 22 mm pipe diameter.    Weather and corrosion resistant powder coating in black.    Fairing protection    Bike-specific development guarantees a snug fit    Simple, screw-on mounting on original attachment pointsIncluded in delivery    2 x Upper crash bar    Mounting instructions    Mounting materialDetails    Material: Steel    Surface: powder coated    Color: black    Total Weight: appr. 4,3 kg / appr. 9.5 lbNote    The following crash bar is not included in delivery.Required for mounting    Installation is only possible together with the SW-MOTECH crash barIncompatible withThe upper crash bars are not compatible with the BMW LED auxiliary lights as the crash bars and lights are mounted onto the same attachment points

Please Note:    For fitment in combination with OEM lower bars    Constructed of heavy-duty mild steel    Designed to provide maximum protection    All components are protected against corrosion by sandblasting and powdercoating    High-strength frame mounting points.    Optical integration, and high-quality fit and finish    Tube diamter: 22 mm    Wall thickness: 2.5 mm    Colour: Black    Total Weight: appr. 2,9 kg / appr. 6.4 lbOptional Extra:Light Mounts for Crash Bars: NSW.00.004.13000/B Made for EVO Fog and High Beam Lights, but other manufacturers lights may fit as well. Suitable for crash bar diameter 22 - 28 mm.Fog lamps: NSW.00.004.51000 / B EVO Universal 12 W / luminous flux: 1050 LM

Protect you tank / fairing with this set of upper crash bars, made bike specific for the KTM 390 Adventure. Please Note: For fitment in combination with KTM lower bars, which are not part of this product!    Constructed of heavy-duty mild steel    Designed to provide maximum protection    All components are protected against corrosion by sandblasting and powdercoating    High-strength frame mounting points.    Optical integration, and high-quality fit and finish    Tube diamter: 21.3 mm    Weight: 3 KGOptional Extra:Light Mounts for Crash Bars: NSW.00.004.13000/B Made for EVO Fog and High Beam Lights, but other manufacturers lights may fit as well. Suitable for crash bar diameter 22 - 28 mm.Fog lamps: NSW.00.490.10001 EVO Universal 12 W / luminous flux: 1050 LM

Please Note: For fitment in combination with OEM lower bars    Check Applications tab for correct bike fitment    Constructed of heavy-duty mild steel    Designed to provide maximum protection    All components are protected against corrosion by sandblasting and powdercoating    High-strength frame mounting points.    Optical integration, and high-quality fit and finish    Tube diamter: 21.3 mm    Wall thickness: 2.5 mm    Colour: Orange    Total Weight: appr. 2,9 kg / appr. 6.4 lbOptional Extra:Light Mounts for Crash Bars: NSW.00.004.13000/B Made for EVO Fog and High Beam Lights, but other manufacturers lights may fit as well. Suitable for crash bar diameter 22 - 28 mm.Fog lamps: NSW.00.490.10001  EVO Universal 12 W / luminous flux: 1050 LM

Upper crash bars offer extra protection in addition to lower crash bars. They are made bike specific and therefore offer a perfect fit. No drilling or welding is required during the installation process. Please Note: Can only be fitted together with lower carsh.      Pipe diameter: 22mm      Black powder coated Included     Crash Bars     Mounting material     Mounting instructions Details     Thickness: 2.5 mm    Material: Steel    Colour: Black    Total Weight: appr. 3,6 kg / appr. 8.0 lb Optional Accessories Light Mount for Crash Bars: Made fro EVO Fog and High Beam Lights, but other manufacturers' lights may fit as well. Suitable for crash bar diameter 22-28 mm Fog lamps: NSW.00.004.51000 / B EVO Universal 12 W / luminous flux: 1050 LM

 Large coverage area : neck, back, chest and abdomen. Muscle support effect, to limit organ movements. Optimized inflating speed and high performance electronics.Embark the airbag technology under your jacket with the "Furygan Airbag System", a proven, high-performance, easy-to-use technology, inserted into a versatile autonomous or connectable vest thanks to the add on of the Chest Connector, and developed by Furygan to maximize protection and deliver unparalleled comfort. PROTECTIONLarge coverage area: neck, back, chest and abdomen.  Muscle support to limit organ movement during a crash.Optimised inflating speed and high-performance electronics.  1621-2 CE approved back protector for back  protection in every circumstance. MATERIALS  37.5® technology which captures and releases  moisture vapor on the side of the body and allows  a perfect fit thanks to its elasticity.3D Mesh technology that creates air circulation and thermal insulation allowing a constant temperature inside the vest, whatever the temperature outside .ERGONOMICS Specially designed to be perfectly integrated  into our compatible products, the connected vest  is comfortable to wear, invisible from the outside  and adapts to every body shape.Easy to use - thanks to the connecting zips,  it will take less than 15 seconds to equip your jacket, and thanks to the removable In&box, you can remove the electronics in a blink of an eye to charge.Control the dashboard of your vest (autonomy,  updates, inflator connection check and much more...)  thanks to the «My In&box» mobile app.Advanced battery-life: 25 hours of riding.Inflator easily replacable in a few minutes  by the user.

VPS handguards are suitable for use in the following areas: enduro, supermoto and adventure bike. They can be mounted in different positions. Adjustable plastic shells for better wind protection. Also suitable for models with long gearsticks and brake handles. Available in various colors. Handguard shell made of impact-resistant plastic provide additional protection against weather, flying rocks and off-road driving    Includes variable wind deflector in black    2 positions available    Adjustable plastic shells for better wind protection    Also suitable for models with long gearsticks and brake handlesIncluded in delivery:    2 x Barkbusters VPS handguard shells    Mounting instructions    Mounting materialDetails:    Color: white    Total Weight: appr. 0,2 kg / appr. 0.5 lb

VPS handguards are suitable for use in the following areas: enduro, supermoto and adventure bike. They can be mounted in different positions. Adjustable plastic shells for better wind protection. Also suitable for models with long gearsticks and brake handles. Available in various colors. Handguard shell made of impact-resistant plastic provide additional protection against weather, flying rocks and off-road driving    Includes variable wind deflector in black    2 positions available    Adjustable plastic shells for better wind protection    Also suitable for models with long gearsticks and brake handlesIncluded in delivery:    2 x Barkbusters VPS handguard shells    Mounting instructions    Mounting materialDetails:    Color: white    Total Weight: appr. 0,2 kg / appr. 0.5 lb