elektroenduro

Legend Gear LH bags has exclusively been designed for cruiser models. The classic Legend Gear look has been combined with high-tech materials and a modern mounting system. The bag mounts easily to the fender strut by use of a bike specific SLH side carriers.This bags is loaded with features, like an integrated handle which makes it easy for the bag to be carried when not mounted to the bike and the M.O.L.L.E. systems allows for attachment of Legend Gear accessory bags. An inner rain liner is sure to keep your gear dry and an integrated anti-theft protection inside the bag can be activated with a quarter turn.The bag's lid and back panel are made from dimensionally stable, but light weight, ABS plastic, as well as PE-reinforced sides, which ensure the bag holds its shape even at higher speeds.A support element mounted to the back panel gives the bag additional stability and guarantees a reliable fit on the mounting points on the fender strut.Features: Side bag LH1 right    Volume: 19.5 Litres    Integrated anti-theft protection on the inside of the bag, which gets activated with a quarter turn.    Material: Made from weather and UV-resistant 600D polyester and grained artificial leather    Robust and easy to clean    Use of passenger footrest is not restricted    Compatible with OEM accessories, like sissy bar and rear rack    Weight: 2.4 KG    Size: 42 x 24 x 28 cmFeatures: Side bag LH2 left   Volume: 25.5 Litres   Weight: 3.1 KG   Size: 47 x 24 x 39 c Included:    1 x Legend Gear Side bag LH1    1 x Legend Gear Side bag LH2    1 x SLH Side carrier LH2 left    1 x SLH Side carrier LH1 right    1 x Legend Gear lock set    Mounting instructions    Mounting material

Legend Gear LH bags has exclusively been designed for cruiser models. The classic Legend Gear look has been combined with high-tech materials and a modern mounting system. The bag mounts easily to the fender strut by use of a bike specific SLH side carriers.This bags is loaded with features, like an integrated handle which makes it easy for the bag to be carried when not mounted to the bike and the M.O.L.L.E. systems allows for attachment of Legend Gear accessory bags. An inner rain liner is sure to keep your gear dry and an integrated anti-theft protection inside the bag can be activated with a quarter turn.The bag's lid and back panel are made from dimensionally stable, but light weight, ABS plastic, as well as PE-reinforced sides, which ensure the bag holds its shape even at higher speeds.A support element mounted to the back panel gives the bag additional stability and guarantees a reliable fit on the mounting points on the fender strut.Features: Side bag LH1 right    Volume: 19.5 Litres    Integrated anti-theft protection on the inside of the bag, which gets activated with a quarter turn.    Material: Made from weather and UV-resistant 600D polyester and grained artificial leather    Robust and easy to clean    Use of passenger footrest is not restricted    Compatible with OEM accessories, like sissy bar and rear rack    Weight: 2.4 KG    Size: 42 x 24 x 28 cmFeatures: Side bag LH2 left   Volume: 25.5 Litres   Weight: 3.1 KG   Size: 47 x 24 x 39 c Included:    1 x Legend Gear Side bag LH1    1 x Legend Gear Side bag LH2    1 x SLH Side carrier LH2 left    1 x SLH Side carrier LH1 right    1 x Legend Gear lock set    Mounting instructions    Mounting material

Legend Gear LH bags has exclusively been designed for cruiser models. The classic Legend Gear look has been combined with high-tech materials and a modern mounting system. The bag mounts easily to the fender strut by use of a bike specific SLH side carriers.This bags is loaded with features, like an integrated handle which makes it easy for the bag to be carried when not mounted to the bike and the M.O.L.L.E. systems allows for attachment of Legend Gear accessory bags. An inner rain liner is sure to keep your gear dry and an integrated anti-theft protection inside the bag can be activated with a quarter turn.The bag's lid and back panel are made from dimensionally stable, but light weight, ABS plastic, as well as PE-reinforced sides, which ensure the bag holds its shape even at higher speeds.A support element mounted to the back panel gives the bag additional stability and guarantees a reliable fit on the mounting points on the fender strut.Features: Side bag LH1 right    Volume: 19.5 Litres    Integrated anti-theft protection on the inside of the bag, which gets activated with a quarter turn.    Material: Made from weather and UV-resistant 600D polyester and grained artificial leather    Robust and easy to clean    Use of passenger footrest is not restricted    Compatible with OEM accessories, like sissy bar and rear rack    Weight: 2.4 KG    Size: 42 x 24 x 28 cmFeatures: Side bag LH2 left   Volume: 25.5 Litres   Weight: 3.1 KG   Size: 47 x 24 x 39 c Included:    1 x Legend Gear Side bag LH1    1 x Legend Gear Side bag LH2    1 x SLH Side carrier LH2 left    1 x SLH Side carrier LH1 right    1 x Legend Gear lock set    Mounting instructions    Mounting material

LH bags has exclusively been designed for cruiser models. The classic Legend Gear look has been combined with high-tech materials and a modern mounting system. The bag mounts easily to the fender strut by use of a bike specific SLH side carriers. This bags is loaded with features, like an integrated handle which makes it easy for the bag to be carried when not mounted to the bike and the M.O.L.L.E. systems allows for attachment of Legend Gear accessory bags. An inner rain liner is sure to keep your gear dry and an integrated anti-theft protection inside the bag can be activated with a quarter turn.The bag's lid and back panel are made from dimensionally stable, but light weight, ABS plastic, as well as PE-reinforced sides, which ensure the bag holds its shape even at higher speeds.A support element mounted to the back panel gives the bag additional stability and guarantees a reliable fit on the mounting points on the fender strut.Features: Side bag LH1 right    Volume: 19.5 Litres    Integrated anti-theft protection on the inside of the bag, which gets activated with a quarter turn.    Material: Made from weather and UV-resistant 600D polyester and grained artificial leather    Robust and easy to clean    Use of passenger footrest is not restricted    Compatible with OEM accessories, like sissy bar and rear rack    Weight: 2.4 KG    Size: 42 x 24 x 28 cmFeatures: Side bag LH2 left   Volume: 25.5 Litres   Weight: 3.1 KG   Size: 47 x 24 x 39 c Included:    1 x Legend Gear Side bag LH1    1 x Legend Gear Side bag LH2    1 x SLH Side carrier LH2 left    1 x SLH Side carrier LH1 right    1 x Legend Gear lock set    Mounting instructions    Mounting material

Legend Gear LH bags has exclusively been designed for cruiser models. The classic Legend Gear look has been combined with high-tech materials and a modern mounting system. The bag mounts easily to the fender strut by use of a bike specific SLH side carriers.This bags is loaded with features, like an integrated handle which makes it easy for the bag to be carried when not mounted to the bike and the M.O.L.L.E. systems allows for attachment of Legend Gear accessory bags. An inner rain liner is sure to keep your gear dry and an integrated anti-theft protection inside the bag can be activated with a quarter turn.The bag's lid and back panel are made from dimensionally stable, but light weight, ABS plastic, as well as PE-reinforced sides, which ensure the bag holds its shape even at higher speeds.A support element mounted to the back panel gives the bag additional stability and guarantees a reliable fit on the mounting points on the fender strut.Features: Side bag LH1 right    Volume: 19.5 Litres    Integrated anti-theft protection on the inside of the bag, which gets activated with a quarter turn.    Material: Made from weather and UV-resistant 600D polyester and grained artificial leather    Robust and easy to clean    Use of passenger footrest is not restricted    Compatible with OEM accessories, like sissy bar and rear rack    Weight: 2.4 KG    Size: 42 x 24 x 28 cmFeatures: Side bag LH2 left   Volume: 25.5 Litres   Weight: 3.1 KG   Size: 47 x 24 x 39 c Included:    1 x Legend Gear Side bag LH1    1 x Legend Gear Side bag LH2    1 x SLH Side carrier LH2 left    1 x SLH Side carrier LH1 right    1 x Legend Gear lock set    Mounting instructions    Mounting material

Legend Gear LH bags has exclusively been designed for cruiser models. The classic Legend Gear look has been combined with high-tech materials and a modern mounting system. The bag mounts easily to the fender strut by use of a bike specific SLH side carriers.This bags is loaded with features, like an integrated handle which makes it easy for the bag to be carried when not mounted to the bike and the M.O.L.L.E. systems allows for attachment of Legend Gear accessory bags. An inner rain liner is sure to keep your gear dry and an integrated anti-theft protection inside the bag can be activated with a quarter turn.The bag's lid and back panel are made from dimensionally stable, but light weight, ABS plastic, as well as PE-reinforced sides, which ensure the bag holds its shape even at higher speeds.A support element mounted to the back panel gives the bag additional stability and guarantees a reliable fit on the mounting points on the fender strut.Features: Side bag LH1 right    Volume: 19.5 Litres    Integrated anti-theft protection on the inside of the bag, which gets activated with a quarter turn.    Material: Made from weather and UV-resistant 600D polyester and grained artificial leather    Robust and easy to clean    Use of passenger footrest is not restricted    Compatible with OEM accessories, like sissy bar and rear rack    Weight: 2.4 KG    Size: 42 x 24 x 28 cmFeatures: Side bag LH2 left   Volume: 25.5 Litres   Weight: 3.1 KG   Size: 47 x 24 x 39 c Included:    1 x Legend Gear Side bag LH1    1 x Legend Gear Side bag LH2    1 x SLH Side carrier LH2 left    1 x SLH Side carrier LH1 right    1 x Legend Gear lock set    Mounting instructions    Mounting material

Legend Gear LH bags has exclusively been designed for cruiser models. The classic Legend Gear look has been combined with high-tech materials and a modern mounting system. The bag mounts easily to the fender strut by use of a bike specific SLH side carriers.This bags is loaded with features, like an integrated handle which makes it easy for the bag to be carried when not mounted to the bike and the M.O.L.L.E. systems allows for attachment of Legend Gear accessory bags. An inner rain liner is sure to keep your gear dry and an integrated anti-theft protection inside the bag can be activated with a quarter turn.The bag's lid and back panel are made from dimensionally stable, but light weight, ABS plastic, as well as PE-reinforced sides, which ensure the bag holds its shape even at higher speeds.A support element mounted to the back panel gives the bag additional stability and guarantees a reliable fit on the mounting points on the fender strut.Features:    Volume: 19.5 Litres    Integrated anti-theft protection on the inside of the bag, which gets activated with a quarter turn.    Material: Made from weather and UV-resistant 600D polyester and grained artificial leather    Robust and easy to clean    Use of passenger footrest is not restricted    Compatible with OEM accessories, like sissy bar and rear rack    Weight: 2.4 KG    Size: 42 x 24 x 28 cmIncluded in delivery:    1 x Legend Gear Side bag LH1    1 x Legend Gear Side bag LH1    1 x SLH Side carrier LH1 left    1 x SLH Side carrier LH1 right    1 x Legend Gear lock set    Mounting instructions    Mounting materialDetails:    Color: black    Total Weight: appr. 6,5 kg / appr. 14.4 lb    Total Volume: 39,0 l

Legend Gear LH bags has exclusively been designed for cruiser models. The classic Legend Gear look has been combined with high-tech materials and a modern mounting system. The bag mounts easily to the fender strut by use of a bike specific SLH side carriers.This bags is loaded with features, like an integrated handle which makes it easy for the bag to be carried when not mounted to the bike and the M.O.L.L.E. systems allows for attachment of Legend Gear accessory bags. An inner rain liner is sure to keep your gear dry and an integrated anti-theft protection inside the bag can be activated with a quarter turn.The bag's lid and back panel are made from dimensionally stable, but light weight, ABS plastic, as well as PE-reinforced sides, which ensure the bag holds its shape even at higher speeds.A support element mounted to the back panel gives the bag additional stability and guarantees a reliable fit on the mounting points on the fender strut.Features:    Volume: 19.5 Litres    Integrated anti-theft protection on the inside of the bag, which gets activated with a quarter turn.    Material: Made from weather and UV-resistant 600D polyester and grained artificial leather    Robust and easy to clean    Use of passenger footrest is not restricted    Compatible with OEM accessories, like sissy bar and rear rack    Weight: 2.4 KG    Size: 42 x 24 x 28 cm Included in delivery:    1 x Legend Gear Side bag LH1    1 x Legend Gear Side bag LH1    1 x SLH Side carrier LH1 left    1 x SLH Side carrier LH1 right    1 x Legend Gear lock set    Mounting instructions    Mounting materialDetails:    Color: black    Total Weight: appr. 6,5 kg / appr. 14.4 lb    Total Volume: 39,0 l

Cylinders are keyed alike. A set of 2 is used for a top case set.Included:    Mounting instructions    2 matching locks    2 keysDetails:    Total Weight: appr. 0,1 kg / appr. 0.3 lb

With this lowering kit, the ADVENTURE-RACK can also be mounted without handles. In doing so the center of gravity of the luggage rack is lowered from the original position. It was developed by SW-MOTECH for the following models: BMW R 1200 GS (13-), R 1200 GS Adventure (13-), R 1200 GS Rallye (16-), R 1250 GS (18-) and R 1250 GS Adventure.    You get a larger flat contact surface in combination with the aluminium pillion cover.    With this lowering kit, the ADVENTURE-RACK can also be mounted without handles.    The center of gravity is lowered from the original position.    Please note that the use of the original BMW side case is not possible.Included in delivery:    1 x Lowering kit for ADVENTURE-RACKDetails:    Material: steel    Color: black    Total Weight: appr. 0,8 kg / appr. 1.7 lbWarning:    Please note that the use of the original BMW side case is not possible.

SW-Motech's Legend Gear is made from state-of-the-art material with a classic style. This line has an ageless "retro" design using high-tech materials and a versatile fastening system. A combination of coated canvas sailing material and robust Napalon synthetic leather support the vintage design, whilst offering the toughness needed for daily use on the road.The LS 2 saddle bag set mounts via the SLS seat strap.        Roll-top closure       Volume: 13.5 litres per bag left and right       Dimensions: 14 x 35 x 31 cmIncluded:       2 Legend Gear Saddle Bags LS2       1 Legend Gear Saddle Strap SLS       2 Waterproof inner bags       4 Hooks       4 License plate straps       4 Mounting straps       2 Dual-ladder lock bucklesPlease Note: To get the best performance from your legend Gear luggage the manufacturer recommmends applying a canvas waterproofing wax to maintain water resistance. Apply at regular intervals or after washing your luggage. Not only will your luggage remain water resistant it's classic ageless appearance will be enhanced.

This sport mirror set boasts a long mirror arm. It can be mounted on motorcycles with mirror mounts with an M10 thread.SW-MOTECH manufactures the adjustable mirrors in a modern and flat design from high-quality forged and black anodised aluminum. The mirror arms consist of continuously adjustable elements and can each be extended by 30 millimeters. This allows the height and length of the mirrors to be adjusted to the requirements of the respective pilot.    With long mirror arm    For mirror mounts with M8 thread     Modern and flat edge design     Partial areas and functional surfaces milled 4 different adjustment possibilities for best possible alignment     Stepless rotation and inclination of the mirror arm    Length of the mirror arm continuously adjustable in the range of 30 mm     Mounting on an existing mirror connection     With ECE test markIncluded in delivery   1 x Mirror Set Sport 1 x    Mounting material for mirror set    Mounting instructions    Mounting material   Details Material: aluminum    Color: black   Total Weight: appr. 0.9 kg / appr. 2.0 lb

This sport mirror set boasts a long mirror arm. It can be mounted on motorcycles with mirror mounts with an M8 thread.SW-MOTECH manufactures the adjustable mirrors in a modern and flat design from high-quality forged and black anodised aluminum. The mirror arms consist of continuously adjustable elements and can each be extended by 30 millimeters. This allows the height and length of the mirrors to be adjusted to the requirements of the respective pilot. With long mirror arm    For mirror mounts with M8 thread     Modern and flat edge design     Partial areas and functional surfaces milled 4 different adjustment possibilities for best possible alignment     Stepless rotation and inclination of the mirror arm    Length of the mirror arm continuously adjustable in the range of 30 mm     Mounting on an existing mirror connection     With ECE test markIncluded in delivery   1 x Mirror Set Sport 1 x    Mounting material for mirror set    Mounting instructions    Mounting material   Details Material: aluminum    Color: black   Total Weight: appr. 0.9 kg / appr. 2.0 lb

Includes all necessary hardware to mount TraX ION and Adventure Top Cases to SW-Motech steel racks.    Quick-Lock design secures topcase to the bike & allows for easy removal when unlocked    Installs quickly using basic hand tools. No cutting or welding requirer.Included in delivery:    1 x Adapter kit for STEEL-RACK    Mounting instructions    Mounting materialDetails:    Total Weight: appr. 0,1 kg / appr. 0.3 lb

Description:       Experience hassle-free and worry-free motorcycle trips with our rackless adventure luggage bag.       Designed by motorcycle enthusiasts and handmade by sewing professionals,       our bag offers a range of features that make it an ideal choice for all types of motorcycles.Replaceable straps       Straps are the most wear receiving elements of luggage systems and have the highest probability to fail during unexpected       bike drops or due to frequent rubbing. To improve longevity, we designed our bags with loops for straps rather than       sewing   straps onto the bag, therefore straps can be easily replaced at any time.Versatile mounting points      Thanks to rackless design our bags mount pretty much to any bike and strap loops allow not only to replace strap if it fails,       but to choose from alternative mounting options as well like plastic cable ties, rubber tie-down straps, hooks etc.External loops       20 strong metal loops allow firmly mount additional bags and items on top or sides of the bag.Rolling closure with increased stability       Bag is tightened by means of pulling on the two plastic buckles, then it is rolled few times and buckled.       Two plastic stiffener bars sewn into the top edge of the bag closure provide the waterproofness and stability.Extra visibility       Reflecting stripes on both sides of the bag improves visibility and safety.Durable materials       Bags are made using top in the market Verseidag industrial fabric from Germany with the highest production      sustainability standards and outstanding tear resistance nominal value of 600/530N. Impact points are reinforced with       thick  anti-abrasive Cordura® layer. Included:      All bags come with 2x 100cm straps      100cm bungee cord with      2 pairs of different size plastic hooks. Optimal size     Volume - 39 liters.

Talaria Komodo MX6 for pre-order - will be here at the end of July 2025! The Talaria Komodo is a high-performance electric dirt bike built for riders who crave power, agility, and endurance. Packing a peak 32kW motor that delivers blistering acceleration and up to 754Nm of torque, it sprints from 0-60 mph in just 4.5 seconds. Its 97.2V 45Ah lithium-ion battery offers up to 70 miles of range, while advanced suspension, lightweight forged alloy frame, and off-road-ready 21"/18" wheels ensure exceptional control on any terrain. With multiple ride modes, regenerative braking, and a premium TFT display, the Komodo blends cutting-edge technology with rugged capability -- ready to dominate trails or the track.Features      32kW Peak Power – Explosive performance for serious riders      96V 45Ah Greenway Lithium Battery – High-capacity power for extended range      21" Front / 18" Rear Wheels – Off-road ready with pro-level sizing      Komodo Controller – Precision-tuned for maximum throttle response      E/S/H/R Ride Modes – Eco, Street, Hyper, and Reverse at your fingertips      Regen Button – Regenerative braking for efficiency and control      Front Dual Chamber Air Forks – 850mm length, 250mm travel for superior suspension      Rear Air Shock – 350mm length, 90mm travel for smooth rear-end control      Forged Alloy Chassis – Lightweight, tough, and ready for impact      520 Chain Guide Protection – Rugged drive protection for off-road abuse     

Not every motorbike has the option for attachment of a tank ring, this is where SW--Motech's strap-on tank bags are a perfect alternative. The PRO Cross features 5.5 Litres capacity and is water / dust proof, making sure all your gear stays dry.Snap buckles allow for easy removal of the bag from the covered fuel cap. The bag can be placed towards the cockpit during refuelling, while it is still connected to the bike via the long strap, which goes around the steering column. The overlapping lid is made from stable EVA and is welded securely to the TPU body of the bag. A waterproof compartment inside the lid offers space for a smart phone or map. The outside of the lid is fitted with a MOLLE attachement, made from durable hypalon. Features:    Suitable for most motorcycle tanks    Water and dust proof    Lid secured magnetically    Welded body made of TPU without seams    Sealed zippers    Zippers made from metal    Reflective details for better visibility    Robust carry handle    Underside made from anti-slip material     Colour: Black    Size: 24 x 27 x 19.9 cm / 9.4 x 10.6 x 7.8 inches    Weight: 0.9 kilos    Volume: 5.5 LitresIncluded:    1 PRO Enduro WP strap-on tank bag    1 Strap Set    2 Adhesive protective film    Mounting InstructionsOptional Accessories:   Tablet Dry Bag: Perfect transport solution for tablets and maps. Two retention arms connect the bag to the MOLLE system on PRO tank bags. Size: 245x200 mm    Smart Phone Dry Bag: Attaches to SW-Motech PRO tank bag MOLLE system - via the T-Lock mount and is suitable for all common smart phones (up to 6.5 inches). Size: 160x80 mm    Zipper Lock: Allows you to lock zipper ends of bag together. Number combination can be chosen individually    PRO Pocket Accessory Bag: With it's 1 Litre capacity the PRO Pocket is perfect for transporting valuables and smaller travel items. It can be attached to all SW-Motech bags, which are fitted with the MOLLE system, either via the incorporated straps or the optional T-Lock holder (can be selected from the Related Product section at the bottom of this screen)

We can't offer tank rings for some bikes - The PRO Enduro WP strap tank bag is the right choice for these bikes: When you stop to refuel, snap buckles allow you to move or fold it away and access to the fuel filler cap is clear. The PRO Enduro WP strap tank bag fits like a glove to touring bikes with sloping fuel tanks and is waterproof: Your luggage is safe from rain and splashing water in any weather. The overlapping lid made made from stable EVA is securely welded to the TPU body. Thanks to the plastic welding, the materials join seamlessly and securely with one another.The clear, waterproof compartment inside the lid offers space for smartphone or map, and there is room for the most important travel accessories in the spacious inner compartment with 11 liters of volume. With the PRO Enduro WP, you can transport electronic devices and cameras safely in any weather. Dust and water don't stand a chance here.The PRO tank bag offers elegant and timeless design together with durable materials and sophisticated product features. The top made of laminated EVA gives the bag a striking shape and ensures a secure hold for auxiliary products like smartphone and tablet mount, along with a MOLLE attachment made from durable hypalon.    Suitable for many motorcycle tanks.    Waterproof tank bag with 11 liters of storage    Top of the tank bag made of laminated and stable EVA    Overlapping lid prevents water from entering    Lid secured magnetically    Welded body made of TPU without seams    MOLLE attachment made of stable hypalon on the top for holding accessories like smartphone and tablet mount    Two outer pockets made of welded hypalon with mesh compartments    Clear compartment for smartphone or maps in inner lid    Sealed zippers    Robust zipper made or metal    Reflective details for better visibility    Robust carrying handle    Underside made of anti-slip materialIncluded in delivery:    1 x PRO Enduro WP strap tank bag    1 x strap set    2 x Adhesive protective foil    Mounting instructionsDetails:    Material: EVA / TPU    Surface: PU-coated    Color: black    Size: 43,0 x 25,0 x 23,0 cm / 16.9 x 9.8 x 9.1 in    Total Weight: appr. 1,4 kg / appr. 3.1 lb    Total Volume: 11,0 l

DUST Cases by SW_Motech - VIDEORobust, waterproof and versatile; the DUSC hard case from SW-MOTECH was developed for any type of ride. Whether a sporty trip, off-road or on the big journey, the new DUSC cases will impress you with their versatility, easy handling and sturdy construction. The versatility of the DUSC system continues when you mount them on the motorcycle. Any DUSC case can be mounted as a top case or as a sidecase, left or right. Its own style and adventure DNA cut a fine figure on both touring bikes and adventure bikes. Robust constructionThe shell construction consists of thermoformed structured ABS plastic shells with a sturdy aluminum frame. The outer material is scratch-resistant and flexible; after impact effects, the plastic returns to its original position. When dropped on its side, the impact forces are absorbed by the plastic corners and transferred to the aluminum frame via the 3D shape of the lid. The well thought-out design and the interaction of the various materials make the DUSC extremely robust, with comparatively low weight. Can be used as a top case and side caseIn addition to its sturdy construction, the DUSC impresses with its universal versatility when mounted on the motorcycle. The case can be mounted both as a top case on rack and as a sideloader side case on the PRO side carrier - whether left or right. The DUSC is available in two sizes: The M version has a capacity of 33 liters, the larger L version holds 41 liters and offers space for a helmet. Simple attachment and secure holdWhether as a top case or as a side case: The DUSC is very easy to attach to the motorcycle. The case is placed on the retaining points and fixed to the carrier via the locking system. Thanks to the double security closes case opening and carrier connection with just one handle. In extensive tests, the DUSC has proven that it reliably holds its position on the carrier even in the event of strong vibrations and impacts. Thus, the DUSC is designed for a variety of uses and it is also suitable for extended off-road tours. Features:      Rugged and waterproof case       Can be used as side case and top case       M-version 33 liters / L-version 41 liters (fits one helmet)       Easy mounting on PRO side carrier or rack       Construction of thermoformed structured 3mm thick       ABS plastic shells and an aluminum frame       Co-locking closure system for lid and case carrier       Protective corners on the lid side with integrated lashing options       Integrated carrying handles       Lock for closing case opening and beam connection (sold separately)       Integrated hooks inside the case to organize the load (available as an option)Included      1 x DUSC L Hard case       Mounting instructions       Mounting materialDetails      Material: ABS plastic       Color: black       Size: 48,6 x 41,3 x 29,5 cm / 19.1 x 16.3 x 11.6 in       Total Weight: appr. 4,1 kg / appr. 8.9 lb       Total Volume: 41,0 l

DUST Cases by SW_Motech - VIDEORobust, waterproof and versatile; the DUSC hard case from SW-MOTECH was developed for any type of ride. Whether a sporty trip, off-road or on the big journey, the new DUSC cases will impress you with their versatility, easy handling and sturdy construction. The versatility of the DUSC system continues when you mount them on the motorcycle. Any DUSC case can be mounted as a top case or as a sidecase, left or right. Its own style and adventure DNA cut a fine figure on both touring bikes and adventure bikes. Robust constructionThe shell construction consists of thermoformed structured ABS plastic shells with a sturdy aluminum frame. The outer material is scratch-resistant and flexible; after impact effects, the plastic returns to its original position. When dropped on its side, the impact forces are absorbed by the plastic corners and transferred to the aluminum frame via the 3D shape of the lid. The well thought-out design and the interaction of the various materials make the DUSC extremely robust, with comparatively low weight. Can be used as a top case and side caseIn addition to its sturdy construction, the DUSC impresses with its universal versatility when mounted on the motorcycle. The case can be mounted both as a top case on rack and as a sideloader side case on the PRO side carrier - whether left or right. The DUSC is available in two sizes: The M version has a capacity of 33 liters, the larger L version holds 41 liters and offers space for a helmet. Simple attachment and secure holdWhether as a top case or as a side case: The DUSC is very easy to attach to the motorcycle. The case is placed on the retaining points and fixed to the carrier via the locking system. Thanks to the double security closes case opening and carrier connection with just one handle. In extensive tests, the DUSC has proven that it reliably holds its position on the carrier even in the event of strong vibrations and impacts. Thus, the DUSC is designed for a variety of uses and it is also suitable for extended off-road tours. Features:      Rugged and waterproof case       Can be used as side case and top case       M-version 33 liters / L-version 41 liters (fits one helmet)       Easy mounting on PRO side carrier or rack       Construction of thermoformed structured 3mm thick       ABS plastic shells and an aluminum frame       Co-locking closure system for lid and case carrier       Protective corners on the lid side with integrated lashing options       Integrated carrying handles       Lock for closing case opening and beam connection (sold separately)       Integrated hooks inside the case to organize the load (available as an option)Included      1 x DUSC L Hard case       Mounting instructions       Mounting materialDetails      Material: ABS plastic       Color: black       Size: 48,6 x 41,3 x 24,7 cm / 19.1 x 16.3 x 9.7 in       Total Weight: appr. 3,9 kg / appr. 8.6 lb       Total Volume: 33,0 l

DUST Cases by SW_MotechRobust, waterproof and versatile; the DUSC hard case from SW-MOTECH was developed for any type of ride. Whether a sporty trip, off-road or on the big journey, the new DUSC cases will impress you with their versatility, easy handling and sturdy construction. The versatility of the DUSC system continues when you mount them on the motorcycle. Any DUSC case can be mounted as a top case or as a sidecase, left or right. Its own style and adventure DNA cut a fine figure on both touring bikes and adventure bikes. Robust constructionThe shell construction consists of thermoformed structured ABS plastic shells with a sturdy aluminum frame. The outer material is scratch-resistant and flexible; after impact effects, the plastic returns to its original position. When dropped on its side, the impact forces are absorbed by the plastic corners and transferred to the aluminum frame via the 3D shape of the lid. The well thought-out design and the interaction of the various materials make the DUSC extremely robust, with comparatively low weight. Can be used as a top case and side caseIn addition to its sturdy construction, the DUSC impresses with its universal versatility when mounted on the motorcycle. The case can be mounted both as a top case on rack and as a sideloader side case on the PRO side carrier - whether left or right. The DUSC is available in 3 sizes: The M version has a capacity of 33 liters, the larger XL version holds 55 liters and offers space for a helmet. Simple attachment and secure holdWhether as a top case or as a side case: The DUSC is very easy to attach to the motorcycle. The case is placed on the retaining points and fixed to the carrier via the locking system. Thanks to the double security closes case opening and carrier connection with just one handle. In extensive tests, the DUSC has proven that it reliably holds its position on the carrier even in the event of strong vibrations and impacts. Thus, the DUSC is designed for a variety of uses and it is also suitable for extended off-road tours. Features:      Rugged and waterproof case       Can be used as side case and top case       XL-version 55 liters (fits two helmet)       Easy mounting on PRO side carrier or rack       Construction of thermoformed structured 3mm thick       ABS plastic shells and an aluminum frame       Co-locking closure system for lid and case carrier       Protective corners on the lid side with integrated lashing options       Integrated carrying handles       Lock for closing case opening and beam connection (sold separately)       Integrated hooks inside the case to organize the load (available as an option)Included      1 x DUSC XL Hard case       Mounting instructions       Mounting materialDetails      Material: ABS plastic       Color: black       Size: 59,4 x 42,3 x 31,2 cm / 23.4 x 16.7 x 12.3 in       Total Weight: appr. 6,1 kg / appr. 13.4 lb       Total Volume: 55,0 l

Whether on the road or off-road: The Adventure handguard kit protects the handlebar of your bike in the event of a fall and your hands from the elements as well as stone chips and branches. The basis is a sturdy aluminum frame to which the Adventure handguard shells are attached.The impact-resistant polypropylene plastic of the shells is flexible and offers the best protection from wind and weather and anything which might get thrown up from the track or road. The shells have a matt black finish. The design of the hand guards and shells protection is also offered from the sides.For even more protection, the separately available crash pad set can be attached to the handguards. The extension set, which increases the protection area of ​​the Adventure handguard shells, provides more weather protection.Features:     Simple two-point mount     Plastics have matt black surface     Handguards colour: Black     Handguards are made from aluminium     Total Weight: appr. 1,6 kg / appr. 3.5 lbPlease Note: Not compatible with KOBRA or Barkbusters plasticsIncluded:    Handguard mounting kit for left and right     Adventure Plastics for left and right     Mounting Instructions     Mounting MaterialOptional Accessories     Crash pads for adventure shells: The solid crash pads are made from PP impact-resistant plastic and provide the Adventure handguards with additional protection in the event of a fall. And they provide even more robust and reinforced protection for the hand guards and shells.    Extensions for adventure shells: Extension made of impact-resistant plastic and increase the protective area of Adventure handguards. it's attached to the top edge of the handguard shells with two screws. It blends in seamlessly and offers your hands more protection from wind and the elements.

The largest model of the SysBag WP trio is made entirely of TPU material and has a total volume of 40 liters. The SysBag WP L features a roll-top closure and an overlapping lid. The inner pocket is removable, two freely positionable dividers with Velcro fasteners make it easy to keep luggage separate. The SysBag WP L is designed for off-road use without exception: the belt buckles of the front compartment are deliberately attached to the top so that no branches can get caught on narrow paths. The outer edges of the bag are covered with robust Hypalon material, which provides additional protection in the event of a fall. With the four compression straps on both sides, the bag can be lashed to form a compact unit, even with a small load. On the front of the SysBag L WP there's a spacious, easily accessible compartment that offers space for rain gear or DIN A4-format maps. Two waterproof zippered compartments on the inside of the bag and the lid offer additional storage space for smaller items.To allow the bag to be attached quickly to the left PRO or EVO side carrier, you'll need to fix the adapter plate that comes included in delivery onto the SysBag WP L in a one-time installation process: Firstly, screw the four mounting elements for the side carrier onto the adapter plate. Next, attach the SysBag WP L to the adapter plate with the loop straps. Once that's done, you can hang the bag on the left PRO or EVO side carrier in one simple movement. The SysBag WP M with an adapter plate can also be attached to the ADVENTURE-RACK or STREET RACK. Features:     Made from TPU material      Attaches to the left PRO or EVO side carrier or to SW-MOTECH racks with the included adapter plate     100% waterproof main compartment      Roll-top made of 210 Ripstop TPU     MOLLE system for attaching accessory bags      Reinforced handles Reflective details for better visibility      Lashing eyelets for attaching cable locks      Velcro fasteners to fix the excess belt lengths      The adapter plate's quick lock system guarantees that the SysBag WP will be held securely by the side carrier      The adapter plate attaches easily to the back of SysBag WP bags using the straps Included in delivery:     1 x SysBag WP L      1 x Adapter plate left for SysBag WP L      1 x Adapter kit for SysBag WP      4 x loop straps 4 x Anti-slip straps     1 x Paint protection film     Mounting instructions      Mounting material Details:     Material: TPU      Color: black      Size: 48,0 x 22,0 x 41,0 cm / 18.9 x 8.7 x 16.1 in      Total Weight: appr. 4,3 kg / appr. 9.4 lb      Total Volume: 27,0-40,0 l Note If you're looking for a bag to match the SysBag WP L with a left-hand adapter plate, you'll also find the SysBag WP L with a right-hand adapter plate for PRO or EVO side carriers in the online store. The adapter kit with the matching retaining cams for PRO or EVO side carriers comes included in delivery. 

The largest model of the SysBag WP trio is made entirely of TPU material and has a total volume of 40 liters. The SysBag WP L features a roll-top closure and an overlapping lid. The inner pocket is removable, two freely positionable dividers with Velcro fasteners make it easy to keep luggage separate. The SysBag WP L is designed for off-road use without exception: the belt buckles of the front compartment are deliberately attached to the top so that no branches can get caught on narrow paths. The outer edges of the bag are covered with robust Hypalon material, which provides additional protection in the event of a fall. With the four compression straps on both sides, the bag can be lashed to form a compact unit, even with a small load. On the front of the SysBag L WP there's a spacious, easily accessible compartment that offers space for rain gear or DIN A4-format maps. Two waterproof zippered compartments on the inside of the bag and the lid offer additional storage space for smaller items.To allow the bag to be attached quickly to the left PRO or EVO side carrier, you'll need to fix the adapter plate that comes included in delivery onto the SysBag WP L in a one-time installation process: Firstly, screw the four mounting elements for the side carrier onto the adapter plate. Next, attach the SysBag WP L to the adapter plate with the loop straps. Once that's done, you can hang the bag on the left PRO or EVO side carrier in one simple movement. The SysBag WP M with an adapter plate can also be attached to the ADVENTURE-RACK or STREET RACK. Features:     Made from TPU material      Attaches to the left PRO or EVO side carrier or to SW-MOTECH racks with the included adapter plate     100% waterproof main compartment      Roll-top made of 210 Ripstop TPU     MOLLE system for attaching accessory bags      Reinforced handles Reflective details for better visibility      Lashing eyelets for attaching cable locks      Velcro fasteners to fix the excess belt lengths      The adapter plate's quick lock system guarantees that the SysBag WP will be held securely by the side carrier      The adapter plate attaches easily to the back of SysBag WP bags using the straps Included in delivery:     1 x SysBag WP L       4 x loop straps 4 x Anti-slip straps     1 x Paint protection film     Mounting instructions      Mounting material Details:     Material: TPU      Color: black      Size: 48,0 x 22,0 x 41,0 cm / 18.9 x 8.7 x 16.1 in      Total Weight: appr. 2,9 kg      Total Volume: 27,0-40,0 l