elektroenduro

Additional protection against rocks and contact with the ground for the engine: the high-quality, aluminium alloy engine guard shows what it's capable of off the street, but provides extra safety and an individualized look on the streets, too. State-of-the-art production gives these bike-specific protectors a secure fit without affecting ground clearance. The installation on frame mounting points lends additional stability and allows for easy installation.    Consists of two components black/silver    Silver undercarriage guard of 4 mm and black side walls of 2.5 mm thick aluminium    Underbody protection from rock chips and collision    Reliable and easy installation on original attachment points, modifications to the motorcycle are not required    Bike-specific development for perfect fit    Mounting material included in delivery    Durable design made of high quality aluminum alloyIncluded in delivery    1 x Engine guard    Mounting instructions    Mounting materialDetails    Material: Aluminum    Surface: brushed / powder coated    Color: silver / black    Total Weight: appr. 2,0 kg / appr. 4.3 lb

    Not with original crash bar!     Underbody protection from stone-chipping and in case of collision    Made from 1 piece, 4mm aluminium    Black powder coated finish (matt)Please Note:Check Applications tab for correct bike fitment - Does not fit Rally models (Rally models require MSS.11.953.10001/B)    Can NOT be installed in conjunction with OEM crash bars (Bikes, which have Triumph crash bars installed require Model MSS.11.953.10100/B)Included:    Engine guard    Mounting material    Mounting instructionsDetails:   Material: Aluminum    Surface: brushed / powder coated    Color: black    Total Weight: appr. 3,5 kg / appr. 7.8 lb

    With original crash bar!    Underbody protection from stone-chipping and in case of collision    Made from 1 piece, 4mm aluminium    Black powder coated finish (matt)Please Note:Can be installed in combination with Triumph crash bars. Can NOT be installed with SW-Motech crash bars.Included:    Engine guard    Mounting material    Mounting instructionsDetails:    Material: Aluminum    Surface: brushed / powder coated    Color: black    Total Weight: appr. 3,2 kg / appr. 7.0 lb

This engine guard made of 4 millimeter-thick aluminum sheet was specially developed for the Yamaha Tracer 9. It protects the oil filter and other engine parts that make up the crossplane engine.Additional protection against rocks and contact with the ground for the engine: the high-quality, aluminium alloy engine guard shows what it's capable of off the street, but provides extra safety and an individualized look on the streets, too. State-of-the-art production gives these bike-specific protectors a secure fit without affecting ground clearance. The installation on frame mounting points lends additional stability and allows for easy installation.   Reliable and easy installation on original attachment points, modifications to the motorcycle are not required    Bike-specific development for perfect fit    Mounting material included in delivery    Durable design made of high quality aluminum alloyIncluded in delivery    1 x Engine guard    Mounting instructions    Mounting materialDetails    Material: Aluminum    Surface: brushed    Color: silver    Total Weight: appr. 2,9 kg / appr. 6.5 lb

Additional protection against rocks and contact with the ground for the engine: the high-quality, aluminium alloy engine guard shows what it's capable of off the street, but provides extra safety and an individualized look on the streets, too. State-of-the-art production gives these bike-specific protectors a secure fit without affecting ground clearance. The installation on frame mounting points lends additional stability and allows for easy installation.    Underbody protection from rock chips and collision    Reliable and easy installation on original attachment points, modifications to the motorcycle are not required    Bike-specific development for perfect fit    Mounting material included in delivery    Durable design made of high quality aluminum alloyIncluded in delivery    1 x Engine guard    Mounting instructions    Mounting materialDetails    Material: Aluminum    Material strength: 0,30 cm / 0.12 in    Surface: brushed    Color: silver    Total Weight: appr. 3,2 kg / appr. 7.0 lb

This bag is suitable for bikes with steep sloping tanks. It's narrow cut front, ensures there is no interference with your bikes handlebars. The EVO system allows for easy attachment and removal of the bag.Please Note:     The bike specific EVO tank ring (attaching to the fuel cap) needs to be purchased separately.Features:    Reflective trim    3 Outer compartments    Sturdy carrying handle    Multiple intergrated compartments    2 Cable Ports    1680 Ballistic Nylon     Integrated channel for GPS mounting bracket    Size: 41 x 31 x 25    Weight: 1.93 kilos    Volume: 16-22 LIncludes:    Rain cover    Shoulder strap    EVO Top Ring (for mounting underneath the tank bag)    Mounting instructions Optional:   Anti Theft Device: Prevent your tank bag from theft (while mounted to your bike) by purchasing the Tank Bag Anti Theft Device. The security pin is fixed inside the tank bag, preventing the tank bag to be released from the tank ring. Also included in the pack is a cable lock.   Zipper Lock: Allows you to lock zipper ends of bag together. Number combination can be chosen individually.Fits:BMW    G 310 R '17-    G 310 GS '17-    F 700GS '12-    F 750 GS '18-    F 800GS '12-    F 850 GS '18-    F 850 GSA '18-    F 900 R '20-    HP2 Megamoto '08-'12    K1200GT '03-'08    R1200GS Adventure, '06-    R1200GSA LC '14-    R1200GS '04-    R1250GS '18-    R1250GSA '18-    R1250RS '18-    S 1000 XR '15-Honda    CB 650 R '18-    CBR 650 F '14-    CBR 650 R '18-    CBF 1000 F '09-'16    CRF 1000 L Africa Twin    Crosstourer 1200 '12- Kawasaki    Ninja 650 '17-    Z 650 '16-    Versys 1000 '19-    Ninja Z 1000 SX '20-KTM    1190 Adv '14-    1190 Adv R '14-    1050 Adventure '15-    1090 Adventure / R '17-    1290 Super Adventure R/S/T '17-'20Suzuki    SV 650 ABS '16-    V-Strom 1050 '20-Triumph    Tiger 800 / XC '11-    Tiger 800 XCX / XRX '15-     Tiger 900 Models ''20-    Speed Triple 1050 RS / S '18-    Tiger 1050SE '12-    Speed Triple 1200 RS '21-    Tiger 1200 ExplorerYamaha    FZ8 '10-    FZ8 Fazer '10-    MT-01    MT-03 '16-    MT-10 '16-    XT1200Z

Made of high strength aluminum alloy and CNC milled. Larger contact surface prevents sinking in soft ground. Side Stand Extension is silver anodized. Upper mounting plate is black powder-coated.    Side stand foot with doubled contact surface (bike specific)    For secure positioning on soft or uneven ground    Bike-specific development for best fit    Simple mounting onto the original side stand using three screws    High-quality workmanship: CNC-milled, made of anodized aluminum alloy and corrosion-resistant stainless steelIncluded in delivery    1 x Extension for side stand foot    Mounting instructions    Mounting materialDetails    Material: Aluminum / Stainless steel    Surface: anodized    Color: black / silver    Total Weight: appr. 0,1 kg / appr. 0.2 lb

The new EVO foot pegs offer stability, comfort and traction under a variety of conditions. Individual adjustments for height, position and angle guarantee best possible ergonomics.The pegs offer 12 position settings from standard to 15 mm lower and up to 7.5 mm forward or back. The face angle can also be changed +/- 18 degrees giving 36 possible settings. There is a removable rubber pad to suit all riding conditions.Features:       Easy installation to original mounting points Large 89 mm x 64 mm foot pad        Removable rubber for additional comfort       Deep serrations offer enhanced grip        Reference marks for symmetrical set up on both sides        Material: Electropolished cast stainless steel        Colour: Silver with black rubber insert       Total Weight: appr. 1,4 kg / appr. 3.1 lb Included:        Left and right bike specific mounting hinges        Left and right Evo foot rests        Removable rubber inserts        Mounting Hardware Installation instructionsFits: Aprilia       SL 750 Shiver '07-'16 BMW       F 800 GT '12-'16 F 800 R '08-'14 Kawasaki       KLV 1000 '03-'05 Suzuki      V-Strom 250 '18-       GSR 600 '05-'10       GSX 650F '07-'16       DL 650 V-Strom / V-Strom '04-'16       V-Strom 1000 / XT '14-'19       V-Strom 1050 / XT '20-       GSF 1250 Bandit /S '06-       GSX 1250 F ABS '09-

    Optimised to provide maximum protection for critical parts    Design intergrates with the styling of the BMW F 800 R    Made from light weight, CNC-milled PA6-MO, which offers higher tensile strength and more impact and UV resistance than Delring    Easy to mount with included instructions    Slider pads are removable from mounts and worn pads can be removed easilyIncluded:    2 frame sliders    Mounting hardware    Mounting instructionsDetails:    Material: PA6 Ertalon / Aluminum    Surface: anodized    Color: black / silver    Total Weight: appr. 2,5 kg / appr. 5.5 lb

    Optimised to provide maximum protection for critical parts    Design intergrates with the styling of the CB 1000 R    Made from light weight, CNC-milled PA6-MO, which offers higher tensile strength and more impact and UV resistance than Delring    Easy to mount with included instructions    Slider pads are removable from mounts and worn pads can be removed easilyIncluded:    2 frame sliders    Mounting hardware    Mounting instructionsDetails:    Material: PA6 Ertalon / Aluminum    Surface: anodized    Color: black / silver    Total Weight: appr. 1,1 kg / appr. 2.4 lb

    Optimised to provide maximum protection for critical parts    Design intergrates with the styling of the CB 650 R    Made from light weight, CNC-milled PA6-MO, which offers higher tensile strength and more impact and UV resistance than Delring    Easy to mount with included instructions    Slider pads are removable from mounts and worn pads can be removed easily Included:    2 frame sliders    Mounting hardware    Mounting instructionsDetails:    Material: PA6 Ertalon / Aluminum    Surface: anodized    Color: black / silver    Total Weight: appr. 2,2 kg / appr. 4.8 lb

    Optimised to provide maximum protection for critical parts    Design intergrates with the styling of the Z 750    Made from light weight, CNC-milled PA6-MO, which offers higher tensile strength and more impact and UV resistance than Delring    Easy to mount with included instructions    Slider pads are removable from mounts and worn pads can be removed easilyIncluded:    2 frame sliders    Mounting hardware    Mounting instructionsDetails:    Material: PA6 Ertalon / Aluminum    Surface: anodized    Color: black / silver    Total Weight: appr. 2,4 kg / appr. 5.3 lb

    Offers excellent underbody protection from stone chipping and collision    Made from aluminium    Manufactured with punch rivets    Powder coated  Details:    Material: Aluminum / Aluminum    Surface: powder coated / powder coated    Color: black / silver    Total Weight: appr. 2,0 kg / appr. 4.4 lbIncluded:    Engine Guard    Mounting Material    Mounting Instructions

        VIDEO - Greenland Wax - Impregnation for your Legend Gear by SW-Motech       Preserve your Legend Gear Luggage by applying Greenland Wax from time to time.       Water resistant and dirt repellent       Natural product made from beeswax and paraffin        Rub wax against the bag's canvas elements & use hair dryer to melt waxInlcuded:       Greenland Wax, 100gDetails      Total Weight: appr. 0,1 kg / appr. 0.2 lb

The safest and most durable hand protectors - classic design, durable and fully encompassing Barkbusters aluminium frame!    Protection for levers and hands from weather and during off-road riding    Bike specific and therefore perfect fit    Using Barkbusters frames - black, powder coated    Hand guard shells made from impact-resistant Moplen plastictIncluded:    2 KOBRA Handguards    2 aluminium frames    Mounting material    Mounting instructionsOptional Extras:    Kobra Hand Guard Extensions: HPR.00.220.30100/B allowing almost 50 % more protection    LED Indicators: HPR.00.220.30000/B (1 watt, overall 16 LEDs) NOTE - If replacing original indicators, optional resistors may be required or indicators could flash too fast or slow, or not at all        If replacing 21 watt globes, 21 watt resistors are required        If replacing 10 watt globes, 10 watt resistors are required        If replacing original LED indicators or using in addition to original indicators, resistors should not be required

Classic design. Protection for levers and hands from weather and during off-road riding    Bike specific and therefore perfect fit    Using Barkbusters frames - black, powder coated    Hand guard shells made from impact-resistant Moplen plastictIncluded:    2 KOBRA Handguards    2 aluminium frames    Mounting material    Mounting instructionsOptional Extras:    Kobra Hand Guard Extensions: HPR.00.220.30100/B allowing almost 50 % more protection    LED Indicators: HPR.00.220.30000/B (1 watt, overall 16 LEDs) NOTE - If replacing original indicators, optional resistors may be required or indicators could flash too fast or slow, or not at all        If replacing 21 watt globes, 21 watt resistors are required        If replacing 10 watt globes, 10 watt resistors are required        If replacing original LED indicators or using in addition to original indicators, resistors should not be required

The safest and most durable hand protectors - classic design, durable and fully encompassing Barkbusters aluminium frame!    Protection for levers and hands from weather and during off-road riding    Bike specific and therefore perfect fit    Using Barkbusters frames - black, powder coated    Hand guard shells made from impact-resistant Moplen plastictIncluded:    2 KOBRA Handguards    2 aluminium frames    Mounting material    Mounting instructionsOptional Extras:    Kobra Hand Guard Extensions: HPR.00.220.30100/B allowing almost 50 % more protection    LED Indicators: HPR.00.220.30000/B (1 watt, overall 16 LEDs) NOTE - If replacing original indicators, optional resistors may be required or indicators could flash too fast or slow, or not at all        If replacing 21 watt globes, 21 watt resistors are required        If replacing 10 watt globes, 10 watt resistors are required        If replacing original LED indicators or using in addition to original indicators, resistors should not be required

The safest and most durable hand protectors - classic design, durable and fully encompassing Barkbusters aluminium frame!    Protection for levers and hands from weather and during off-road riding    Bike specific and therefore perfect fit    Using Barkbusters frames - black, powder coated    Hand guard shells made from impact-resistant Moplen plastictIncluded:    2 KOBRA Handguards    2 aluminium frames    Mounting material    Mounting instructionsOptional Extras:    Kobra Hand Guard Extensions: HPR.00.220.30100/B allowing almost 50 % more protection    LED Indicators: HPR.00.220.30000/B (1 watt, overall 16 LEDs) NOTE - If replacing original indicators, optional resistors may be required or indicators could flash too fast or slow, or not at all        If replacing 21 watt globes, 21 watt resistors are required        If replacing 10 watt globes, 10 watt resistors are required        If replacing original LED indicators or using in addition to original indicators, resistors should not be required.VPS handguards plastics: suitable for use in the following areas: enduro, supermoto and adventure bike.

The safest and most durable hand protectors - classic design, durable and fully encompassing Barkbusters aluminium frame!    Protection for levers and hands from weather and during off-road riding    Bike specific and therefore perfect fit    Using Barkbusters frames - black, powder coated    Hand guard shells made from impact-resistant Moplen plastictIncluded:    2 KOBRA Handguards    2 aluminium frames    Mounting material    Mounting instructionsOptional Extras:    Kobra Hand Guard Extensions: HPR.00.220.30100/B allowing almost 50 % more protection    LED Indicators: HPR.00.220.30000/B (1 watt, overall 16 LEDs) NOTE - If replacing original indicators, optional resistors may be required or indicators could flash too fast or slow, or not at all        If replacing 21 watt globes, 21 watt resistors are required        If replacing 10 watt globes, 10 watt resistors are required        If replacing original LED indicators or using in addition to original indicators, resistors should not be required.VPS handguards plastics: suitable for use in the following areas: enduro, supermoto and adventure bike.

Classic design. Protection for levers and hands from weather and during off-road riding    Bike specific and therefore perfect fit    Using Barkbusters frames - black, powder coated    Hand guard shells made from impact-resistant Moplen plastictIncluded:    2 KOBRA Handguards    2 aluminium frames    Mounting material    Mounting instructionsOptional Extras:    Kobra Hand Guard Extensions: HPR.00.220.30100/B allowing almost 50 % more protection    LED Indicators: HPR.00.220.30000/B (1 watt, overall 16 LEDs) NOTE - If replacing original indicators, optional resistors may be required or indicators could flash too fast or slow, or not at all        If replacing 21 watt globes, 21 watt resistors are required        If replacing 10 watt globes, 10 watt resistors are required        If replacing original LED indicators or using in addition to original indicators, resistors should not be required

The safest and most durable hand protectors - classic design, durable and fully encompassing Barkbusters aluminium frame!    Protection for levers and hands from weather and during off-road riding    Bike specific and therefore perfect fit    Using Barkbusters frames - black, powder coated    Hand guard shells made from impact-resistant Moplen plastictIncluded:    2 KOBRA Handguards    2 aluminium frames    Mounting material    Mounting instructionsOptional Extras:    Kobra Hand Guard Extensions: HPR.00.220.30100/B allowing almost 50 % more protection    LED Indicators: HPR.00.220.30000/B (1 watt, overall 16 LEDs) NOTE - If replacing original indicators, optional resistors may be required or indicators could flash too fast or slow, or not at all        If replacing 21 watt globes, 21 watt resistors are required        If replacing 10 watt globes, 10 watt resistors are required        If replacing original LED indicators or using in addition to original indicators, resistors should not be requiredVPS handguards plastics: suitable for use in the following areas: enduro, supermoto and adventure bike.

The safest and most durable hand protectors - classic design, durable and fully encompassing Barkbusters aluminium frame!    Protection for levers and hands from weather and during off-road riding    Bike specific and therefore perfect fit    Using Barkbusters frames - black, powder coated    Hand guard shells made from impact-resistant Moplen plastictIncluded:    2 KOBRA Handguards    2 aluminium frames    Mounting material    Mounting instructionsOptional Extras:    Kobra Hand Guard Extensions: HPR.00.220.30100/B allowing almost 50 % more protection    LED Indicators: HPR.00.220.30000/B (1 watt, overall 16 LEDs) NOTE - If replacing original indicators, optional resistors may be required or indicators could flash too fast or slow, or not at all        If replacing 21 watt globes, 21 watt resistors are required        If replacing 10 watt globes, 10 watt resistors are required        If replacing original LED indicators or using in addition to original indicators, resistors should not be requiredVPS handguards plastics: suitable for use in the following areas: enduro, supermoto and adventure bike.Fits: Beta      498 RR '13- Honda      CRF 230 F/L     CRF 250 L '17-      CRF 250 R/X      XR 250 R/L      XR 400 R      CRF 450 R/X      NX 650 Dominator '88-'00      XR 650 L/R      XRV 750 Africa Twin '89-'03 Kawasaki      KX 125 KLX 140 L       KX 250 / F       Super Sherpa       KLX 450       KX 450 F       KLE 500 '91-'05       KLR 650 '94- Suzuki      DRZ 125 L       RM 125 DR 200 SE '08- RM / Z 250       DRZ 400 S/E '99-'07       DRZ 400 SM (for 22 mm handlebar only)       RMZ 450 (for 22 mm handlebar only)       DR 650 SE '08- Yamaha      TTR 125E      XT 125X YZ 125      TW 200      TTR 230 / 250      XT 250      YZ 250/F (for 22 mm handlebar only)      YZ 450F      XT 600 '84-'03      XT 660 R '04-'16      XT 660 X '04-'16

The extensions are made from impact-resistant plastic allows you to increase the protective area of the Adventure handguards. The extension is attached to the top edge of the handguard shells with two screws. It blends in seamlessly and offers your hands more protection from wind and the elements.Features:      Easy mounting to the Adventure hand protector shells due to precise design      Colour: Black       Total Weight: appr. 0,1 kg / appr. 0.2 lbPlease Note: Not compatible with KOBRA or Barkbusters handguardsIncluded:      1 x Extension set for Adventure handguards      Mounting instructions       Mounting Material

These bike-specific bar backs fit into the bike's design just as seamlessly as the bar risers. With a height increase of 20 mm, the handlebars are moved back by 30 mm to ensure an optimal sitting position for the driver. High-quality anodizing protects the surface from scratches and weather conditions.If you're having trouble reaching your handlebars comfortably, consider using a bar back. Our sturdy backs made from aluminum shift the handlebar upward and to the back. For the rider, that can mean a more relaxed, back-friendly seating position, along with better control of the bike. BMW R 1200 GS '08-'12 Handle Bar Risers / Bar Backs by SW-Motech                Replaces original handlebar clamps to raise bars by 20mm up and back by 30mm               No change of control cables, wiring, or hoses is required for most motorcycles however,                the installer should always check  for adequate cable/wiring/hose slack during installation               Colour: Silver Included:            2 x Bar back          2 x Handlebar clamps          Mounting instructions          Mounting materialDetails           Material: Aluminum         Surface: anodized         Color: silver         Total Weight: appr. 0,6 kg / appr. 1.3 lb