LUGGAGE

SW-Motech's Legend Gear is made from state-of-the-art material with a classic style. This line has an ageless "retro" design using high-tech materials and a versatile fastening system. A combination of coated canvas sailing material and robust Napalon synthetic leather support the vintage design, whilst offering the toughness needed for daily use on the road.The Side Carriers SLC are bike specific and allow easy and safe mounting to original mounting points of the bike. Frames can be removed within seconds via the quick-lock system.    System can be used with one or both sides installed    Fastenings for accessory bags    Please Note: Check Applications tab for correct bike fitmentIncludes:    SLC Side Carriers For Left and Right Side    LC2 Legend Gear Side Bag 13.5 Litres Left - Dimensions: 14 x 35 x 31 cm - Weight: 1.4 Kilos    LC1 Legend Gear Side Bag 9.8 Litres Right - Dimensions: 14 x 31 x 26 cm - Weight: 1.2 Kilos    Water proof inner bagsPlease Note:   To get the best performance from your legend Gear luggage the manufacturer recommends applying a canvas waterproofing wax to maintain water resistance. Apply at regular intervals or after washing your luggage. Not only will your luggage remain water resistant it's classic ageless appearance will be enhanced.Optional:Accessory Bag: 0.8 (12x6x18 cm) and 1.2 (15x5x18 cm) litres. Perfect add-on for small items you like to easily access. Attach to most Legend Gear bags and are also compatible with Saddle Strap SLS and Tank Strap SLA. Military grade fastening system. Comes with circumferential zipper and rain cover.Smart Phone Bag: 0.8 (9.4x2.1x18 cm) Litres. Suitable for smart phones with a 5.5" display, comes with integrated bill pocket and 3 credit card size slots. Multi-touch compatible. Can be attached to most Legend Gear bags and is also compatible with Saddle Strap SLS and Tank Strap SLA.Shoulder Strap: 90 to 150 cm long / 3.8 cm wide. Offers shoulder padding and fastening loops for accessory bags. Can be attached to tail bags, saddle bags and tank bags.

SW-Motech's Legend Gear is made from state-of-the-art material with a classic style. This line has an ageless "retro" design using high-tech materials and a versatile fastening system. A combination of coated canvas sailing material and robust Napalon synthetic leather support the vintage design, whilst offering the toughness needed for daily use on the road.The Side Carriers SLC are bike specific and allow easy and safe mounting to original mounting points of the bike. Frames can be removed within seconds via the quick-lock system.    System can be used with one or both sides installed    Fastenings for accessory bags    Please Note: Check Applications tab for correct bike fitmentIncludes:    SLC Side Carriers For Left and Right Side    LC2 Legend Gear Side Bag 13.5 Litres Left - Dimensions: 14 x 35 x 31 cm - Weight: 1.4 Kilos    LC1 Legend Gear Side Bag 9.8 Litres Right - Dimensions: 14 x 31 x 26 cm - Weight: 1.2 Kilos    Water proof inner bagsPlease Note:   To get the best performance from your legend Gear luggage the manufacturer recommends applying a canvas waterproofing wax to maintain water resistance. Apply at regular intervals or after washing your luggage. Not only will your luggage remain water resistant it's classic ageless appearance will be enhanced.Optional:Accessory Bag: 0.8 (12x6x18 cm) and 1.2 (15x5x18 cm) litres. Perfect add-on for small items you like to easily access. Attach to most Legend Gear bags and are also compatible with Saddle Strap SLS and Tank Strap SLA. Military grade fastening system. Comes with circumferential zipper and rain cover.Smart Phone Bag: 0.8 (9.4x2.1x18 cm) Litres. Suitable for smart phones with a 5.5" display, comes with integrated bill pocket and 3 credit card size slots. Multi-touch compatible. Can be attached to most Legend Gear bags and is also compatible with Saddle Strap SLS and Tank Strap SLA.Shoulder Strap: 90 to 150 cm long / 3.8 cm wide. Offers shoulder padding and fastening loops for accessory bags. Can be attached to tail bags, saddle bags and tank bags.

SW-Motech's Legend Gear is made from state-of-the-art material with a classic style. This line has an ageless "retro" design using high-tech materials and a versatile fastening system. A combination of coated canvas sailing material and robust Napalon synthetic leather support the vintage design, whilst offering the toughness needed for daily use on the road.The Side Carriers SLC are bike specific and allow easy and safe mounting to original mounting points of the bike. Frames can be removed within seconds via the quick-lock system.    System can be used with one or both sides installed    Fastenings for accessory bags    Please Note: Check Applications tab for correct bike fitmentIncludes:    SLC Side Carriers For Left and Right Side    LC2 Legend Gear Side Bag 13.5 Litres Left - Dimensions: 14 x 35 x 31 cm - Weight: 1.4 Kilos    LC1 Legend Gear Side Bag 9.8 Litres Right - Dimensions: 14 x 31 x 26 cm - Weight: 1.2 Kilos    Water proof inner bagsPlease Note:   To get the best performance from your legend Gear luggage the manufacturer recommends applying a canvas waterproofing wax to maintain water resistance. Apply at regular intervals or after washing your luggage. Not only will your luggage remain water resistant it's classic ageless appearance will be enhanced.Optional:Accessory Bag: 0.8 (12x6x18 cm) and 1.2 (15x5x18 cm) litres. Perfect add-on for small items you like to easily access. Attach to most Legend Gear bags and are also compatible with Saddle Strap SLS and Tank Strap SLA. Military grade fastening system. Comes with circumferential zipper and rain cover.Smart Phone Bag: 0.8 (9.4x2.1x18 cm) Litres. Suitable for smart phones with a 5.5" display, comes with integrated bill pocket and 3 credit card size slots. Multi-touch compatible. Can be attached to most Legend Gear bags and is also compatible with Saddle Strap SLS and Tank Strap SLA.Shoulder Strap: 90 to 150 cm long / 3.8 cm wide. Offers shoulder padding and fastening loops for accessory bags. Can be attached to tail bags, saddle bags and tank bags.

Sportsters -1200 Custom., Forty-Eight., Icon 883., Roadster 883., Roadster 1200.,Superlow. SW-Motech's Legend Gear is made from state-of-the-art material with a classic style. This line has an ageless "retro" design using high-tech materials and a versatile fastening system. A combination of coated canvas sailing material and robust Napalon synthetic leather support the vintage design, whilst offering the toughness needed for daily use on the road.The Side Carriers SLC are bike specific and allow easy and safe mounting to original mounting points of the bike. Frames can be removed within seconds via the quick-lock system.    System can be used with one or both sides installed    Fastenings for accessory bags    Please Note: Check Applications tab for correct bike fitmentIncludes:    SLC Side Carriers For Left and Right Side    LC2 Legend Gear Side Bag 13.5 Litres Left - Dimensions: 14 x 35 x 31 cm - Weight: 1.4 Kilos    LC1 Legend Gear Side Bag 9.8 Litres Right - Dimensions: 14 x 31 x 26 cm - Weight: 1.2 Kilos    Water proof inner bagsPlease Note:   To get the best performance from your legend Gear luggage the manufacturer recommends applying a canvas waterproofing wax to maintain water resistance. Apply at regular intervals or after washing your luggage. Not only will your luggage remain water resistant it's classic ageless appearance will be enhanced.Optional:Accessory Bag: 0.8 (12x6x18 cm) and 1.2 (15x5x18 cm) litres. Perfect add-on for small items you like to easily access. Attach to most Legend Gear bags and are also compatible with Saddle Strap SLS and Tank Strap SLA. Military grade fastening system. Comes with circumferential zipper and rain cover.Smart Phone Bag: 0.8 (9.4x2.1x18 cm) Litres. Suitable for smart phones with a 5.5" display, comes with integrated bill pocket and 3 credit card size slots. Multi-touch compatible. Can be attached to most Legend Gear bags and is also compatible with Saddle Strap SLS and Tank Strap SLA.Shoulder Strap: 90 to 150 cm long / 3.8 cm wide. Offers shoulder padding and fastening loops for accessory bags. Can be attached to tail bags, saddle bags and tank bags.

Specifically developed for sports bikes and smaller street bikes. The rack is ideal for strapping soft luggage to it, especially in combination with the Street Rack Luggage Rack Extension. Without the use of tools, an adapter plate can be fitted, which allows installation of  SW-Motech or other manufacturer's hard cases. Please Note: Check Applications tab for correct bike fitment High precision CNC production process Suitable for T-Ray Top cases, SysBag 15/30 and also for cases from GIVI, Krauser and Shad (adapter kits are sold separately) Simple installation to the original mounting points of the bike Made from low weight, durable 5 mm aluminium alloy Colour: Black, powder coated  Included: Street Rack Mounting Equipment Mounting instructions Optional: Street Rack Extension: The perfect addition to any SW-Motech Street rack, when carrying soft luggage, which is wider and needing additional support. (45 cm x 30 cm). Installs within seconds.

Specifically developed for sports bikes and smaller street bikes. The rack is ideal for strapping soft luggage to it, especially in combination with the Street Rack Luggage Rack Extension. Without the use of tools, an adapter plate can be fitted, which allows installation of  SW-Motech or other manufacturer's hard cases.    High precision CNC production process    Suitable for T-Ray Top cases, SysBag 15/30 and also for cases from GIVI, Krauser and Shad (adapter kits are sold separately)    Simple installation to the original mounting points of the bike    Made from low weight, durable 5 mm aluminium alloy    Colour: Black, powder coated    Weight: 3.6 kilosIncluded:    Street Rack    Mounting Equipment    Mounting instructionsOptional:    Street Rack Extension: The perfect addition to any SW-Motech Street rack, when carrying soft luggage, which is wider and needing additional support. (45 cm x 30 cm). Installs within seconds.

The TraX Advenutre sets a new benchmark in aluminium touring cases. They are designed to be extremely tough and made from 1.5 mm aluminium, further strengthened by lid and side wall ribbed contours. With a weight of between 4.6 and 5.4 kilos, the TraX Adventure is one of the lightest cases available in it's class.The robot welded body easily withstands water and dust alike. Punch riveted plastic elements avoid perforation of the wall material, which results in no weak spots for moisture ingress being created. Even rivets and screws have been designed to withstand all weather and riding conditions. Easy to use latches and anodized carrying handles make luggae handling a real treat.Features:    Made from powder coated anodised aluminium with a wall thickness of 1.5 mm    Easy to clean surface    Includes lid restricting rope    Four sturdy tie-down points have been integrated into the lids' corners    Corner protectors are made from reinforced fiber glass    Stainless steel latches    Mounts to SW-Motech Quick-Lock side carriers    Adapter kits available for different carrier systems    38 L capacity    Dimensions: 41 x 34 x 33 cm    Weight: Approximately 4.6 kgIncluded:    TraX Adventure aluminium touring case, anodized    Pre-installed mounting rail for adapter plate    Lid restricting rope    Carry bagPlease Note:The 2-set locking cylinders are required for the top case set-up. One for securing the box to the adapter plate and one to lock the case. (If purchasing a complete side case and top case set-up, only one 6-set of locking cylinders is required)    An adapter plate / kit is required (to be selected from drop down list) to mount a TraX top case to SW-Motech rear racks        Alu Rack - Adapter Plate GPT.00.152.400        Steel Rack - Adapter Kit GPT.00.152.20201        Adventure Rack - Adapter Kit GPT.00.152.35100        Street Rack - Adapter Plate GPT.00.152.54100/BOptional:    TraX Top Box Inner Bag: Removable inner bag (textile) with two compartments. Ideal when you don't want to de-mount your box, but want to remove the contents of your case. Suitable for TraX cases 38 Litre top boxes.    TraX Gear+ Lid Net: Highly flexible net, which mounts to fixation points inside TraX Adv 38 litre top cases. Allows you to store items you wish to have at hand as soon as you open the case.    TraX Adventure Top Box Backrest: Made from foam rubber, the backrest provides a more comfortable seating position for pillion passengers.

The TraX Advenutre sets a new benchmark in aluminium touring cases. They are designed to be extremely tough and made from 1.5 mm aluminium, further strengthened by lid and side wall ribbed contours. With a weight of between 4.6 and 5.4 kilos, the TraX Adventure is one of the lightest cases available in it's class.The robot welded body easily withstands water and dust alike. Punch riveted plastic elements avoid perforation of the wall material, which results in no weak spots for moisture ingress being created. Even rivets and screws have been designed to withstand all weather and riding conditions. Easy to use latches and anodized carrying handles make luggae handling a real treat.Features:    Made from anodised aluminium with a wall thickness of 1.5 mm    Easy to clean surface    Includes lid restricting rope    Four sturdy tie-down points have been integrated into the lids' corners    Corner protectors are made from reinforced fiber glass    Stainless steel latches    Mounts to SW-Motech Quick-Lock side carriers    Adapter kits available for different carrier systems    38 L capacity    Dimensions: 41 x 34 x 33 cm    Weight: Approximately 4.6 kgIncluded:    TraX Adventure aluminium touring case, anodized    Pre-installed mounting rail for adapter plate    Lid restricting rope    Carry bagPlease Note:The 2-set locking cylinders are required for the top case set-up. One for securing the box to the adapter plate and one to lock the case. (If purchasing a complete side case and top case set-up, only one 6-set of locking cylinders is required)    An adapter plate / kit is required (to be selected from drop down list) to mount a TraX top case to SW-Motech rear racks        Alu Rack - Adapter Plate GPT.00.152.400        Steel Rack - Adapter Kit GPT.00.152.20201        Adventure Rack - Adapter Kit GPT.00.152.35100        Street Rack - Adapter Plate GPT.00.152.54100/B Optional:     TraX Top Box Inner Bag: Removable inner bag (textile) with two compartments. Ideal when you don't want to de-mount your box, but want to remove the contents of your case. Suitable for TraX cases 38 Litre top boxes.    TraX Gear+ Lid Net: Highly flexible net, which mounts to fixation points inside TraX Adv 38 litre top cases. Allows you to store items you wish to have at hand as soon as you open the case.     TraX Adventure Top Box Backrest: Made from foam rubber, the backrest provides a more comfortable seating position for pillion passengers.

The well known EVO cases have undergone a make-over and have become the ION range. The improved cases are still excellent value for money and an alternative to the top of the range Adventure cases.Features:    Light in weight, but durable with a wall thickness of 1.5 mm    Waterproof due to robot-guided welding, punch rivet technology and exchangeable gaskets    Latch buckles are made from stainless steel    Made from aluminium, black powder coated    Weight: 4.6 kilos    Size: 41 x 34 x 33 cm    Volume: 38 LitresPlease Note:    The 2-set locking cylinders are required for the top case set-up.  One for securing the box to the rear rack and one to lock the case. (If purchasing a complete side case and top case set-up, only one 6-set of locking cylinders is required)     An adapter plate / kit is required (to be selected from drop down list) to mount a TraX top case to SW-Motech rear racks     Alu Rack - Adapter Plate GPT.00.152.400     Steel Rack - Adapter Kit GPT.00.152.20101     Adventure Rack - Adapter Kit GPT.00.152.35100     Street Rack - Adapter Plate GPT.00.152.54100/B Optional:     TraX Top Case Inner Bag: Removable inner bag (textile) with one large compartment. Ideal when you don't want to de-mount your box, but want to remove the contents of your case. Dimensions: 39x31x31 cm     Lid Restricting Rope (Set of Two): Provides more stability when opening lid, which has additional luggage attached.      Pillion Back Rest: Made for TraX ION top cases. Ensures a more comfortable seating position for the pillion rider.

Buy the complete Set and SAVE. This takes the guess work out of buying luggage for your Tenere 700, as everything is included and you are ready for your next adventure once you have installed this kit. In addition to SW-Motech's Pro Side Carriers you also get two of the new SysBag WP Large, adapter plates and fitting kit. Feature of Pro Side Carriers Following on from SW-Motech's Quick-Lock side carriers, is the new Pro Side Carrier. Still removable, but even more robust. Made from 2.5 mm strong steel, the carriers mount even closer to the bike.  And the functional drill holes anable mounting of RotopaX cells (adapter available separetly) and other acceccories.      Fully removable, with newly developed, more robust quick-release fasteners     Optional anti-theft protection available     For permanent mounting, quick-release fasteners can be replaced with optional hard bolt kit     Suitable for TraX, SysBags, GIVI/Kappa, Krauser, Hepco & Becker and Shad cases with use of appropriate fitting kit, which can be purchased separately     Black powder coated surface     Total Weight: appr. 6,2 kg / appr. 13.7 lb     Width of side carriers installed to bike (without bags attached) 57 cm Features of SysBag WP      Made from TPU material      Attaches to the left PRO or EVO side carrier or to SW-MOTECH racks with the included adapter plate     100% waterproof main compartment      Roll-top made of 210 Ripstop TPU     MOLLE system for attaching accessory bags      Reinforced handles Reflective details for better visibility      Lashing eyelets for attaching cable locks      Velcro fasteners to fix the excess belt lengths      The adapter plate's quick lock system guarantees that the SysBag WP will be held securely by the side carrier      The adapter plate attaches easily to the back of SysBag WP bags using the straps SysBag WP Details      Material: TPU      Color: black      Size: 48,0 x 22,0 x 41,0 cm / 18.9 x 8.7 x 16.1 in       Total Weight: appr. 4,3 kg / appr. 9.4 lb       Total Volume: 27,0-40,0 l Features of Adapter SysBag Adapter Plate     Mounts to SW-Motech PRO and EVO Side carriers      For attachment to SW-Motech SysBag WP      Quick-Lock system allows for easy removal, but at the same time guarantees a secure hold of the bag to side carriers      Adapter plates are available for left and right hand side / for SysBag WP S / M / L      Made from powder coated aluminium      Colour: Black     Total Weight: appr. 1,3 kg / appr. 2.9 lb  Included in delivery:     2 x PRO Side carrier    2 x Adapter kit for SysBag WP    1 x Adapter plate left for SysBag WP L     1 x Right adapter plate for SysBag WP L    2 x SysBag WP L Mounting instructions     Mounting materialOptional: Anti Theft Device: We recommend you protect your side carriers from theft with the anti theft device, which locks the frames to your bike. Bolt Adapter Kit: The bolt adapter kit replaces the Quick-Lock adapters and allows for the SW-Motech Pro Side Carriers to be mounted "permanently" to the bike, which adds strength and rigidity. Recommended for rough off-road riding. Tool Tube: Why not add this tool tube for safe storage of your spares and tools while you are on the road. It's made from robust plastic and is fitted with a rubber sealing inside screw cap. Mounts to the inside of your side carrier.     Outer Dimensions: 30.5 cm length (34 cm length incl. mounting bracket) x 10 cm diameter (11 cm including mounting bracket)     Inner Dimensions: 30 cm length x 8 cm diameter

SW-Motech's new waterproof SysBag range is sure to impress. Perfect for your next adventure. With it's maximum capacity of 23 Litres SysBag WP M is the medium size bag in the range. Bags are made from TPU material and the roll top from 21D Ripstop TPU. The intergraded MOLLE system allows for attachment of additional accessory bags. The inner bag is removable and two re-positionable dividers allow for separation of luggage if needed. Please Note: Read fitting instructions under Downloads tab for detailed information on mounting to side carriers and strapping to rear racks

Tear, tensile, puncture & impact resistance and most importantely this bag is waterproof. Made from welded Tarpaulin, it's perfect for all weather conditions and suitable for most bikes. The new arrangement of the straps allows easy combination with other Drybag models on the passenger seat or the rack. Thanks to their simple design, the new Drybags perfectly fit to the waterproof SysBag WP bags and the WP tank bags from the PRO line.Features:    Dimensions: 58 cm length, 28 cm in diameter    Capacity: 35 litres    Reflective details    4 Point attachment system    Roll top closure with Velcro and compression straps to ensure an effective dust and waterproof seal    Shoulder carry strap included    Multiple dry bags can be mounted on top of each other    Colour: Grey    Total Weight: appr. 1,2 kg / appr. 2.5 lbOptional Accessories:    Luggage Cable Lock 180 cm: Ideal accessory for securing rear bags, tank bags, helmets and jackets to your bike. Number lock combination can be re-set

Weather-proof tail and carrying bag in one: The lightweight Drybag is available in two sizes and can be attached easily to the rear rack, passenger seat or other Drybags. Extremely durable, totally waterproof and highly UV resistant: our dry bags are made from durable 500D polyester with double-sided coating and are especially popular with motorcycle travelers who expose their luggage to extreme stress during a tour. These practical rolls are ideal in all weather conditions, are easy to clean and are worth the money. Made from welded Tarpaulin, it's perfect for all weather conditions and suitable for most bikes.Features:    Dimensions: 50 cm length, 26 cm in diameter    Capacity: 26 litres    Reflective details    4 Point attachment system    Roll top closure with Velcro and compression straps to ensure an effective dust and waterproof seal    Shoulder carry strap included    Multiple dry bags can be mounted on top of each other    Colour: Grey    Total Weight: appr. 1,2 kg / appr. 2.5 lbOptional Accessories:    Luggage Cable Lock 180 cm: Ideal accessory for securing rear bags, tank bags, helmets and jackets to your bike. Number lock combination can be re-set

Tear, tensile, puncture & impact resistance and most importantely this bag is waterproof. Made from welded Tarpaulin, it's perfect for all weather conditions and suitable for most bikes.Features:    Dimensions: 55 cm length, 30 cm in diameter    Capacity: 35 litres    Reflective details    4 Point attachment system    Roll top closure with Velcro and compression straps to ensure an effective dust and waterproof seal    Shoulder carry strap included    Multiple dry bags can be mounted on top of each other    Colour: Black    Total Weight: appr. 1,2 kg / appr. 2.5 lbOptional Accessories:    Luggage Cable Lock 180 cm: Ideal accessory for securing rear bags, tank bags, helmets and jackets to your bike. Number lock combination can be re-set

The Drybag 80 offers unique versatility: The waterproof bag can be used as a tank bag or tail bag and can also be attached to the crash bar or to the Drybag 700. Can also be used as a practical shoulder bag.Extremely durable, totally waterproof and highly UV resistant: our dry bags are made from durable 500D polyester with double-sided coating and are especially popular with motorcycle travelers who expose their luggage to extreme stress during a tour. These practical rolls are ideal in all weather conditions, are easy to clean and are worth the money.Features:    Universal fit, suitable for most bikes    Material: welded Tarpaulin    Size: 8L (h 35 x w 19 x d 9 cm)    Total Weight: appr. 0,5 kg / appr. 1.1 lb    Colour: Anthracite / Black    Stable 3-point attachment system    Usable as shoulder bag    Retroreflective details for more safety on the roadIncluded:   Tailbag Drybag   3 mounting straps    Shoulder strap

The universal fit of the PRO Rearbag makes it just as suitable for use on road bikes as it is for adventure bikes. The pillion seat is the perfect place to mount it, as the slightly convex underside moulds around the seat. With a volume of 22-34 Litres, the bag offers enough space for the gear you need for a weekend trip. The top of the bag is made from dimensionally stable and laminated EVA material, which allows for mounting of additional bags to the integrated MOLLE system. The patented lashing hooks allow flexible attachment of the PRO Tail bags. The straps are hooked and tensioned in one step. To remove the bag, the strap is released in one easy step and removed from the lashing eyelet by pulling the drawstring. The excess strap length can be secured to the strap with a Velcro fastener. This allows the bag to be used on different motorcycles, as the strap length can be adjusted accordingly. Features: Universal fit for most motorcycles Zipper mesh compartment inside lid Additional storage in two outer pockets, which have covered zippers Storage space for a helmet Underside made from anti-slip material 4 point strap mounting Made from durable and UV-resistant 1680 Ballistic Nylon with splash proof inner lining Reflective details for better visibility MOLLE attachment made from stable Hypalon material on the top of the bag Simple and quick mounting of the bag to the pillion seat Sturdy carry handle Weather protection due to waterproof inner bag Colour: Black / anthrazite Size: 40 x 43 x 25 cm / 15.7 x 16.9 x 9.8 inches Weight: 1.8 kilos Volume: 22-34 Litres Included: 1 PRO Rearbag 1 Waterproof inner liner 4 Loops straps with lashing hooks 2 Lashing eyelets for attachment to license plate holder 1 Protective film  Mounting Instructions Optional Accessories: Luggage Cable Lock 180 cm: Ideal accessory for securing rear bags, tank bags, helmets and jackets to your bike. Number lock combination can be re-set Zipper Lock: Allows you to lock zipper ends of bag together. Number lock combination can be re-set PRO Plus Accessory Bag: With it's 3-6 Litres capacity the PRO Plus is perfect for transporting smaller travel items, which you want in easy reach. Size: 28x21x17cm. It can be attached to all SW-Motech tail bags, which are fitted with the MOLLE system, either via the incorporated straps or the optional T-Lock holder (can be selected from the Related Product section at the bottom of this screen)

The main characteristic of the EVO Sport Tank Bag is the striking design. Perfect for sport and super sport motorbikes with long, flat tanks. Plenty of storage space and inner and outer pockets to gear your gear organised. The EVO system allows for attachment and removal of the bag within seconds.Please Note: The bike specific EVO tank ring (attaching to the fuel cap) needs to be purchased separately.Features:    Sturdy carry handle    Integrated map holder    Reflective details    2 outer pockets    2 Cable ports (back and front - splash proof)    Integrated channel for GPS mounting bracket    Carry Handle    Capacity: 14-21L    Dimensions: 34 x 17 x 40 cm (w/h/d)    Weight: 1.7 kilos    Material: 1680D ballistic nylon, EVA caseIncluded:    EVO Topring (for mounting underneath the tank bag)    Raincover    Shoulder strapOptional:   Anti Theft Device: Prevent your tank bag from theft (while mounted to your bike) by purchasing the Tank Bag Anti Theft Device. The security pin is fixed inside the tank bag, preventing the tank bag to be released from the tank ring. Also included in the pack is a cable lock.     Zipper Lock: Allows you to lock zipper ends of bag together. Number combination can be chosen individually.Fits:Aprilia    SL 1000 Falco '00-'01    RSV 1000 Tuono '04-'06    RS 125 '98-'02    Tuono V4 R '11-    RSV4 1100 Factory '19-BMW    R NineT '14-    R NineT /5 '19-    R NineT Scrambler '16-    R NineT Pure '17-    R NineT Racer '17-    R NineT Urban GS '17-    K 1200 R/S '05-'08    K 1300 R/S '09-    R 1100 RS '93-'06    R 1200 S '05-'08    R 1250RS '18-    S 1000 RR '10-    S 1000 R '14-Ducati    748 '00-'03    848  '8-'11 / Evo '11-'13    Superbike 899 Panigale '14-    916 '94-'98    959 Panigale '16-    996 '00-'02    1098 / R '07-'09 (not Street Fighter)    1198 / R '09-'12    1199 Panigale/S '12-    Monster 797 '17-    Monster 1200 S '14-Honda    CB 500/S '93-'03     CB 600 F Hornet '07-'10 / CB 600 S Hornet '98-'06 / CBR 600 RR '03-    CB 750 '92-'03    CB 900 F Hornet '02-'05 / CBR 900RR '93-'03    CB 1000R '08- / CBR 1000 '93-'99 / CBR 1000 RR '04-     CBR 1000 RR-R Fireblade / SP '20-    CB 1300 '03- / CB 1300S '05-    CBR 1100 XX Blackbird '99-'06    NT 650 V Deauville '98-'05 / NT 650 V Revere '88-'97    VFR 750F '91-'97    VFR 800 '98-'01 / VFR 800 V-Tec '02-'06Kawasaki    ER-5 '96-'06    GPZ 500S '87-'03    GPZ 900 '84-'89    Ninja 250 R '08- / Ninja 500R '08-    Ninja ZX-6R 636 '13-    ZRX 1100 '89-'01 / ZRX 1200R/S '01-'06    ZX6 R Ninja '95-'02 / ZX7 R Ninja '96-'01 / ZX9 R Ninja '96-'01    ZXR 400 '08-    ZZR 600 '98-'06 / ZZR 1100 '89-'01/ ZZR 1200 '02-'06KTM    1190 RC8 R '11-Moto Guzzi    V11 Suzuki    GS 500E '89-'06 / GS 500F '04-'06    GS 600F '98-'05    GSX 600F '88-'05 / GSX R 600 '97-    GSX 750 F '88-'05 / GSX R 750 '96-    GSX-R 1000 '01-    GSX-S 1000 F '15-    GSX-S 1000 Katana '19-    GSX 1200 Inazuma '99-'01    GSX 1300 B-King '08-    GSX R 1300 Hayabusa '99-    GSX 1400 '01-'06    RF 600 R/F '94-'99 / RF 900 F/R '94-'99    TL 1000R '98-'99Triumph    Daytona 600 '03-'04 / 675 '06-    Daytona 900 '93-'96 / 955 '97-'05    Speed Triple 1050 '04- / Speed Triple 1050 R '12-    Speed Triple 1200 RS '21-    Sprint GT '10-    Sprint ST 1050    Street Triple '07-    Street Triple Rx '15-    Street Triple R, RS, S '16-    Street Triple RS '20- Yamaha    FZ 6 Fazer '04-'10    FZR 600 R '94-'96    FZS 600 Fazer '98-'03    FZ 8 '10- / FZ 8 Fazer '10-    FZR 1000 '89-'94    FZS 1000 Fazer '00-'05    MT-07 '14-'20    TRX 850 '96-'99    XJR 1200 '95-'98    XJR 1300 '98-'06    YZF-R6 '98-    YZF 600R '96-'00    YZF 750R '93-'96    YZF 1000 R Thunderace '98-'00    YZF-R1 '97-

The SW-Motech Advenutre sets a new benchmark in aluminium touring cases. They are designed to be extremely tough and made from 1.5 mm aluminium, further strengthened by lid and side wall ribbed contours. With a weight of between 4.6 and 5.4 kilos, the TraX Adventure is one of the lightest cases available in it's class.The robot welded body easily withstands water and dust alike. Punch riveted plastic elements avoid perforation of the wall material, which results in no weak spots for moisture ingress being created. Even rivets and screws have been designed to withstand all weather and riding conditions. The lid can be removed completely, via a quick-release fastener. Easy to use latches and anodized carrying handles make luggage handling a real treat.Features:    Made from powder coated aluminium with a wall strenght of 1.5 mm    Easy to clean surface    Includes lid restricting rope    Four sturdy tie-down points have been integrated into the lids' corners    Corner protectors are made from reinforced fiber glass    Stainless steel latches    Mounts to SW-Motech Quick-Lock side carriers    Adapter kits available for different carrier systems    45 L capacity    Dimensions: 49 x 28 x 37 cm    Weight: Approximately 5.5 kgIncluded:   TraX Adventure aluminium touring case, black powder coated    Pre-installed mounting rail for side carrier    Lid restricting rope    Carry bagPlease Note:ALK.00.165.16303 Locking cylinders are required for the side case set-up, which can be selected from the drop down menu. A set includes 6 locks and 2 keys. If your set-up is for side cases only, you have two spare locks.    The TraX side cases are mounted to SW-Motech's bike specific EVO or PRO side carriers - plus mounting kit (One mounting kit for both sides)        KFT.00.152.200 for SW-Motech EVO Side Carriers        KFT.00.152.35100 for SW-Motech PRO Side Carriers Optional:    TraX Inner Bag M&L: Removable inner bag (textile) with two compartments. Ideal when you don't want to de-mount your box, but want to remove the contents of your case. Suitable for TraX cases 37 & 45 Litres.    TraX Adventure Lid Net: Highly flexible net, which mounts to fixation points inside TraX Adv 45 litre cases. Allows you to store items you wish to have at hand as soon as you open the case.    TraX Adventure Lid Inner Bag: Made from tear resistant UV proof 600D Polyester. Comes with straps for attachment to fixing points of 37 & 45 Litre TraX Adv cases. The contents of the bag can be accessed while it's fixed to the lid.    TraX Expansion Bag: The water proof expansion bag offers 15 Litres of additional storage and attaches to tie down points on the lid of 37 & 45 Litre TraX Adv cases. It's made from laser welded, easy to clean Tarpaulin. Size: 45 x 22 x 15 cm

The SW-Motech Advenutre sets a new benchmark in aluminium touring cases. They are designed to be extremely tough and made from 1.5 mm aluminium, further strengthened by lid and side wall ribbed contours. With a weight of between 4.6 and 5.4 kilos, the TraX Adventure is one of the lightest cases available in it's class.The robot welded body easily withstands water and dust alike. Punch riveted plastic elements avoid perforation of the wall material, which results in no weak spots for moisture ingress being created. Even rivets and screws have been designed to withstand all weather and riding conditions. The lid can be removed completely, via a quick-release fastener. Easy to use latches and anodized carrying handles make luggage handling a real treat.Features:    Made from powder coated aluminium with a wall strenght of 1.5 mm    Easy to clean surface    Includes lid restricting rope    Four sturdy tie-down points have been integrated into the lids' corners    Corner protectors are made from reinforced fiber glass    Stainless steel latches    Mounts to SW-Motech Quick-Lock side carriers    Adapter kits available for different carrier systems    45 L capacity    Dimensions: 49 x 28 x 37 cm    Weight: Approximately 5.5 kgIncluded:    TraX Adventure aluminium touring case, black powder coated    Pre-installed mounting rail for side carrier    Lid restricting rope    Carry bagPlease Note:ALK.00.165.16303 Locking cylinders are required for the side case set-up, which can be selected from the drop down menu. A set includes 6 locks and 2 keys. If your set-up is for side cases only, you have two spare locks.    The TraX side cases are mounted to SW-Motech's bike specific EVO or PRO side carriers - plus mounting kit (One mounting kit for both sides)        KFT.00.152.200 for SW-Motech EVO Side Carriers        KFT.00.152.35100 for SW-Motech PRO Side CarriersOptional:   TraX Inner Bag M&L: Removable inner bag (textile) with two compartments. Ideal when you don't want to de-mount your box, but want to remove the contents of your case. Suitable for TraX cases 37 & 45 Litres.    TraX Adventure Lid Net: Highly flexible net, which mounts to fixation points inside TraX Adv 45 litre cases. Allows you to store items you wish to have at hand as soon as you open the case.    TraX Adventure Lid Inner Bag: Made from tear resistant UV proof 600D Polyester. Comes with straps for attachment to fixing points of 37 & 45 Litre TraX Adv cases. The contents of the bag can be accessed while it's fixed to the lid.    TraX Expansion Bag: The water proof expansion bag offers 15 Litres of additional storage and attaches to tie down points on the lid of 37 & 45 Litre TraX Adv cases. It's made from laser welded, easy to clean Tarpaulin. Size: 45 x 22 x 15 cm

The SW-Motech Advenutre sets a new benchmark in aluminium touring cases. They are designed to be extremely tough and made from 1.5 mm aluminium, further strengthened by lid and side wall ribbed contours. With a weight of between 4.6 and 5.4 kilos, the TraX Adventure is one of the lightest cases available in it's class.The robot welded body easily withstands water and dust alike. Punch riveted plastic elements avoid perforation of the wall material, which results in no weak spots for moisture ingress being created. Even rivets and screws have been designed to withstand all weather and riding conditions. The lid can be removed completely, via a quick-release fastener. Easy to use latches and anodized carrying handles make luggage handling a real treat.Features:    Made from powder coated aluminium with a wall strenght of 1.5 mm    Easy to clean surface    Includes lid restricting rope    Four sturdy tie-down points have been integrated into the lids' corners    Corner protectors are made from reinforced fiber glass    Stainless steel latches    Mounts to SW-Motech Quick-Lock side carriers    Adapter kits available for different carrier systems    45 L capacity    Dimensions: 49 x 28 x 37 cm    Weight: Approximately 5.5 kgIncluded:   TraX Adventure aluminium touring case, black powder coated    Pre-installed mounting rail for side carrier    Lid restricting rope    Carry bagPlease Note:ALK.00.165.16303 Locking cylinders are required for the side case set-up, which can be selected from the drop down menu. A set includes 6 locks and 2 keys. If your set-up is for side cases only, you have two spare locks.    The TraX side cases are mounted to SW-Motech's bike specific EVO or PRO side carriers - plus mounting kit (One mounting kit for both sides)        KFT.00.152.200 for SW-Motech EVO Side Carriers        KFT.00.152.35100 for SW-Motech PRO Side CarriersOptional:   TraX Inner Bag M&L: Removable inner bag (textile) with two compartments. Ideal when you don't want to de-mount your box, but want to remove the contents of your case. Suitable for TraX cases 37 & 45 Litres.    TraX Adventure Lid Net: Highly flexible net, which mounts to fixation points inside TraX Adv 45 litre cases. Allows you to store items you wish to have at hand as soon as you open the case.    TraX Adventure Lid Inner Bag: Made from tear resistant UV proof 600D Polyester. Comes with straps for attachment to fixing points of 37 & 45 Litre TraX Adv cases. The contents of the bag can be accessed while it's fixed to the lid.    TraX Expansion Bag: The water proof expansion bag offers 15 Litres of additional storage and attaches to tie down points on the lid of 37 & 45 Litre TraX Adv cases. It's made from laser welded, easy to clean Tarpaulin. Size: 45 x 22 x 15 cm

The SW-Motech Advenutre sets a new benchmark in aluminium touring cases. They are designed to be extremely tough and made from 1.5 mm aluminium, further strengthened by lid and side wall ribbed contours. With a weight of between 4.6 and 5.4 kilos, the TraX Adventure is one of the lightest cases available in it's class.The robot welded body easily withstands water and dust alike. Punch riveted plastic elements avoid perforation of the wall material, which results in no weak spots for moisture ingress being created. Even rivets and screws have been designed to withstand all weather and riding conditions. The lid can be removed completely, via a quick-release fastener. Easy to use latches and anodized carrying handles make luggage handling a real treat.Features:    Made from powder coated aluminium with a wall strenght of 1.5 mm    Easy to clean surface    Includes lid restricting rope    Four sturdy tie-down points have been integrated into the lids' corners    Corner protectors are made from reinforced fiber glass    Stainless steel latches    Mounts to SW-Motech Quick-Lock side carriers    Adapter kits available for different carrier systems    45 L capacity    Dimensions: 49 x 28 x 37 cm    Weight: Approximately 5.5 kgIncluded:    TraX Adventure aluminium touring case, black powder coated    Pre-installed mounting rail for side carrier    Lid restricting rope    Carry bagPlease Note:ALK.00.165.16303 Locking cylinders are required for the side case set-up, which can be selected from the drop down menu. A set includes 6 locks and 2 keys. If your set-up is for side cases only, you have two spare locks.    The TraX side cases are mounted to SW-Motech's bike specific EVO or PRO side carriers - plus mounting kit (One mounting kit for both sides)        KFT.00.152.200 for SW-Motech EVO Side Carriers        KFT.00.152.35100 for SW-Motech PRO Side CarriersOptional:    TraX Inner Bag M&L: Removable inner bag (textile) with two compartments. Ideal when you don't want to de-mount your box, but want to remove the contents of your case. Suitable for TraX cases 37 & 45 Litres.    TraX Adventure Lid Net: Highly flexible net, which mounts to fixation points inside TraX Adv 45 litre cases. Allows you to store items you wish to have at hand as soon as you open the case.    TraX Adventure Lid Inner Bag: Made from tear resistant UV proof 600D Polyester. Comes with straps for attachment to fixing points of 37 & 45 Litre TraX Adv cases. The contents of the bag can be accessed while it's fixed to the lid.    TraX Expansion Bag: The water proof expansion bag offers 15 Litres of additional storage and attaches to tie down points on the lid of 37 & 45 Litre TraX Adv cases. It's made from laser welded, easy to clean Tarpaulin. Size: 45 x 22 x 15 cm

The SW-Motech Advenutre sets a new benchmark in aluminium touring cases. They are designed to be extremely tough and made from 1.5 mm aluminium, further strengthened by lid and side wall ribbed contours. With a weight of between 4.6 and 5.4 kilos, the TraX Adventure is one of the lightest cases available in it's class.The robot welded body easily withstands water and dust alike. Punch riveted plastic elements avoid perforation of the wall material, which results in no weak spots for moisture ingress being created. Even rivets and screws have been designed to withstand all weather and riding conditions. The lid can be removed completely, via a quick-release fastener. Easy to use latches and anodized carrying handles make luggage handling a real treat.Features:    Made from powder coated aluminium with a wall strenght of 1.5 mm    Easy to clean surface    Includes lid restricting rope    Four sturdy tie-down points have been integrated into the lids' corners    Corner protectors are made from reinforced fiber glass    Stainless steel latches    Mounts to SW-Motech Quick-Lock side carriers    Adapter kits available for different carrier systems    37 L capacity    Dimensions: 49 x 23 x 37 cm    Weight: Approximately 5.1 kgIncluded:    TraX Adventure aluminium touring case, black powder coated    Pre-installed mounting rail for side carrier    Lid restricting rope    Carry bagPlease Note:ALK.00.165.16303 Locking cylinders are required for the side case set-up, which can be selected from the drop down menu. A set includes 6 locks and 2 keys. If your set-up is for side cases only, you have two spare locks.    The TraX side cases are mounted to SW-Motech's bike specific EVO or PRO side carriers - plus mounting kit (One mounting kit for both sides)        KFT.00.152.200 for SW-Motech EVO Side Carriers        KFT.00.152.35100 for SW-Motech PRO Side CarriersOptional:    TraX Inner Bag M&L: Removable inner bag (textile) with two compartments. Ideal when you don't want to de-mount your box, but want to remove the contents of your case. Suitable for TraX cases 37 & 45 Litres.    TraX Adventure Lid Net: Highly flexible net, which mounts to fixation points inside TraX Adv 45 litre cases. Allows you to store items you wish to have at hand as soon as you open the case.    TraX Adventure Lid Inner Bag: Made from tear resistant UV proof 600D Polyester. Comes with straps for attachment to fixing points of 37 & 45 Litre TraX Adv cases. The contents of the bag can be accessed while it's fixed to the lid.    TraX Expansion Bag: The water proof expansion bag offers 15 Litres of additional storage and attaches to tie down points on the lid of 37 & 45 Litre TraX Adv cases. It's made from laser welded, easy to clean Tarpaulin. Size: 45 x 22 x 15 cm

The SW-Motech Advenutre sets a new benchmark in aluminium touring cases. They are designed to be extremely tough and made from 1.5 mm aluminium, further strengthened by lid and side wall ribbed contours. With a weight of between 4.6 and 5.4 kilos, the TraX Adventure is one of the lightest cases available in it's class.The robot welded body easily withstands water and dust alike. Punch riveted plastic elements avoid perforation of the wall material, which results in no weak spots for moisture ingress being created. Even rivets and screws have been designed to withstand all weather and riding conditions. The lid can be removed completely, via a quick-release fastener. Easy to use latches and anodized carrying handles make luggage handling a real treat.Features:    Made from powder coated aluminium with a wall strenght of 1.5 mm    Easy to clean surface    Includes lid restricting rope    Four sturdy tie-down points have been integrated into the lids' corners    Corner protectors are made from reinforced fiber glass    Stainless steel latches    Mounts to SW-Motech Quick-Lock side carriers    Adapter kits available for different carrier systems    37 L capacity    Dimensions: 49 x 23 x 37 cm    Weight: Approximately 5.1 kgIncluded:    TraX Adventure aluminium touring case, black powder coated    Pre-installed mounting rail for side carrier    Lid restricting rope    Carry bagPlease Note:ALK.00.165.16303 Locking cylinders are required for the side case set-up, which can be selected from the drop down menu. A set includes 6 locks and 2 keys. If your set-up is for side cases only, you have two spare locks.    The TraX side cases are mounted to SW-Motech's bike specific EVO or PRO side carriers - plus mounting kit (One mounting kit for both sides)        KFT.00.152.200 for SW-Motech EVO Side Carriers        KFT.00.152.35100 for SW-Motech PRO Side CarriersOptional:    TraX Inner Bag M&L: Removable inner bag (textile) with two compartments. Ideal when you don't want to de-mount your box, but want to remove the contents of your case. Suitable for TraX cases 37 & 45 Litres.    TraX Adventure Lid Net: Highly flexible net, which mounts to fixation points inside TraX Adv 45 litre cases. Allows you to store items you wish to have at hand as soon as you open the case.    TraX Adventure Lid Inner Bag: Made from tear resistant UV proof 600D Polyester. Comes with straps for attachment to fixing points of 37 & 45 Litre TraX Adv cases. The contents of the bag can be accessed while it's fixed to the lid.    TraX Expansion Bag: The water proof expansion bag offers 15 Litres of additional storage and attaches to tie down points on the lid of 37 & 45 Litre TraX Adv cases. It's made from laser welded, easy to clean Tarpaulin. Size: 45 x 22 x 15 cm

The SW-Motech Advenutre sets a new benchmark in aluminium touring cases. They are designed to be extremely tough and made from 1.5 mm aluminium, further strengthened by lid and side wall ribbed contours. With a weight of between 4.6 and 5.4 kilos, the TraX Adventure is one of the lightest cases available in it's class.The robot welded body easily withstands water and dust alike. Punch riveted plastic elements avoid perforation of the wall material, which results in no weak spots for moisture ingress being created. Even rivets and screws have been designed to withstand all weather and riding conditions. The lid can be removed completely, via a quick-release fastener. Easy to use latches and anodized carrying handles make luggage handling a real treat.Features:    Made from powder coated aluminium with a wall strenght of 1.5 mm    Easy to clean surface    Includes lid restricting rope    Four sturdy tie-down points have been integrated into the lids' corners    Corner protectors are made from reinforced fiber glass    Stainless steel latches    Mounts to SW-Motech Quick-Lock side carriers    Adapter kits available for different carrier systems    37 L capacity    Dimensions: 49 x 23 x 37 cm    Weight: Approximately 5.1 kgIncluded:    TraX Adventure aluminium touring case, black powder coated    Pre-installed mounting rail for side carrier    Lid restricting rope    Carry bagPlease Note:ALK.00.165.16303 Locking cylinders are required for the side case set-up, which can be selected from the drop down menu. A set includes 6 locks and 2 keys. If your set-up is for side cases only, you have two spare locks.    The TraX side cases are mounted to SW-Motech's bike specific EVO or PRO side carriers - plus mounting kit (One mounting kit for both sides)        KFT.00.152.200 for SW-Motech EVO Side Carriers        KFT.00.152.35100 for SW-Motech PRO Side CarriersOptional:    TraX Inner Bag M&L: Removable inner bag (textile) with two compartments. Ideal when you don't want to de-mount your box, but want to remove the contents of your case. Suitable for TraX cases 37 & 45 Litres.    TraX Adventure Lid Net: Highly flexible net, which mounts to fixation points inside TraX Adv 45 litre cases. Allows you to store items you wish to have at hand as soon as you open the case.    TraX Adventure Lid Inner Bag: Made from tear resistant UV proof 600D Polyester. Comes with straps for attachment to fixing points of 37 & 45 Litre TraX Adv cases. The contents of the bag can be accessed while it's fixed to the lid.    TraX Expansion Bag: The water proof expansion bag offers 15 Litres of additional storage and attaches to tie down points on the lid of 37 & 45 Litre TraX Adv cases. It's made from laser welded, easy to clean Tarpaulin. Size: 45 x 22 x 15 cm