TraX Adventure 2 Side Case Sets - Adventure Bikes
With this complete system, you get all the components you need to start your next motorcycle tour with the BMW F750GS, F850GS/Adv and the DUSC: two robust DUSC hard cases, two removable PRO side carriers, an attachment kit and a simultaneously locking lock set. The bike-specific carriers and size of the cases are designed to perfectly match the shape of the tail as well as the motorcycle's exhaust system.Robust, waterproof, versatile – the DUSC hard case from SW-MOTECH was developed for all types of motorcycle tours. Whether it's a sporty trip, off-roading or a long journey, the completely redesigned DUSC impresses with its easy handling and reliable luggage transport. Its own style and adventure DNA cut a fine figure on both touring bikes and travel enduro bikes. The DUSC can be easily attached to the motorcycle. The case is placed on the breakpoints and fixed to the carrier using the locking system. Thanks to the double security feature, the case opening and carrier connection can be closed with just one movement. In extensive tests, the DUSC has proven that it reliably holds its position on the carrier, even in the event of strong vibrations and impacts. The DUSC is therefore designed for a wide range of uses and is also suitable for extended off-road tours.PRO side carrier Following on from SW-Motech's Quick-Lock side carriers, is the new Pro Side Carrier. Still removable, but even more robust. Made from 2.5 mm strong steel, the carriers mount even closer to the bike. And the functional drill holes anable mounting of RotopaX cells (adapter available separetly) and other acceccories. Fully removable, with newly developed, more robust quick-release fasteners Optional anti-theft protection available For permanent mounting, quick-release fasteners can be replaced with optional hard bolt kit Suitable for TraX, SysBags, GIVI/Kappa, Krauser, Hepco & Becker and Shad cases with use of appropriate fitting kit, which can be purchased separately Black powder coated surfacePlease Note:Adapter kits are required for aluminum cases from SW-MOTECH and other manufacturers and also for AERO ABS side cases and SysBags with adapter plates (SysBag 15, 30, WP L). Included: PRO Side Carrier Mounting Equipment Mounting instructionsDUSC Adapter kit for PRO side carrier. Adapter kit for attaching DUSC side cases to the PRO side carrier from SW-MOTECH
All accessories you need for a side case set-up are included in this kit. TEST WINNER in the magazine MOTORRAD issue 05/2020. Test result: VERY GOOD You get SW-Motech top of the range TraX Adventure side cases, a set of tough Pro side carriers, key cylinders, fitting kit, anti-theft device and even a key chain, which make a functional little tool.The cases are welded, made from 1.5 mm aluminium and are waterproof. Lids have build in carry handles and tie-down points. Sets are available in black and silver.Features of Pro Side Carriers: Fully removable with newly developed more robust quick-release fasteners Drill Holes enable mounting of Rotopax cells (adapter available separately) Made from 2.5 mm strong steel, constructed for positioning close to the bike For "permanent" mounting, quick-release fastener can be replaced with optional hard bolt kit, which can be ordered via the related product section at the bottom of this screen Black powder coated surface Mounting and demounting happens within seconds due to quick fasteners Rear width with mounted carriers, but without cases: 510 mm Features of TraX Adventure Side Cases: Tough and waterproof aluminium case Fiber-Reinforced plastic corners Robot welding and punch riveting prevent moisture ingress Cases are anodized (silver design) or powder coated (black design) against oxidation and abrasion Completely removable lid with quick release fastener 4 tie-down points, integrated into the lid corners Stainless steel latches, anodized aluminium handles Pre-installed mounting rails serve as a strengthening frame Waterproof seal can be replaced Weight: 45 Litre Case: 5.4KG - 37 Litre Case: 5.1KG Dimensions: 45 Litre Case: 49 x 28 x 37 cm - 37 Litre Case: 49 x 23 x 37 cm Included: TraX Adventure Side Case 37L Right TraX Adventure Side Case 45L Left Pro Side Carriers Fitting Kit Lid Limiters 6 Locks / Cylinders Anti Theft Device Key Chain: Functional Tool Mounting material Mounting instructionsOptional Accessories:TraX Gear+ Lid Net: The highly flexible net mounts to fixation points inside the lids of the Adventure cases and allows you to store items you wish to have a hand as soon as you open the cases. Size: 37L Case: 12 x 28cm, 45L Case: 20 x28 cmTraX Gear+ Inner Bag: Keep your luggage organised with the padded inner bag. Large carry handles allow for easy removal of the bag from the top case. The bag can be used for any side case with dimensions from 48 x 20 x 33 cm to 48 x 25 x 33 cm. Bag expands via zipTraX Inner Lid Bag: The padded lid inner bag is made from tear-resistant 600D polyster and has different compartments, perfect for storing documents and other personal items you like to have in one place and available reach when you open your TraX caseTraX Expansion Bag: Need more luggage space? Add these waterproof expansion bags, which mount to the top of TraX cases, but also other manufacturer's cases, like BMW. The bags have a carry handle and an inner storage dvider. Size: 45 x 22 x 15 cm, 15 L capacity
All accessories you need for a side case set-up are included in this kit. TEST WINNER in the magazine MOTORRAD issue 05/2020. Test result: VERY GOODYou get SW-Motech top of the range TraX Adventure side cases, a set of tough Pro side carriers, key cylinders, fitting kit, anti-theft device and even a key chain, which make a functional little tool.The cases are welded, made from 1.5 mm aluminium and are waterproof. Lids have build in carry handles and tie-down points. Sets are available in black and silver.Features of Pro Side Carriers: Fully removable with newly developed more robust quick-release fasteners Drill Holes enable mounting of Rotopax cells (adapter available separately) Made from 2.5 mm strong steel, constructed for positioning close to the bike For "permanent" mounting, quick-release fastener can be replaced with optional hard bolt kit, which can be ordered via the related product section at the bottom of this screen Black powder coated surface Mounting and demounting happens within seconds due to quick fasteners Rear width with mounted carriers, but without cases: 510 mmFeatures of TraX Adventure Side Cases: Tough and waterproof aluminium case Fiber-Reinforced plastic corners Robot welding and punch riveting prevent moisture ingress Cases are anodized (silver design) or powder coated (black design) against oxidation and abrasion Completely removable lid with quick release fastener 4 tie-down points, integrated into the lid corners Stainless steel latches, anodized aluminium handles Pre-installed mounting rails serve as a strengthening frame Waterproof seal can be replaced Weight: 45 Litre Case: 5.4KG - 37 Litre Case: 5.1KG Dimensions: 45 Litre Case: 49 x 28 x 37 cm - 37 Litre Case: 49 x 23 x 37 cmIncluded: TraX Adventure Side Case 37L Left TraX Adventure Side Case 45L Right Pro Side Carriers Fitting Kit Lid Limiters 6 Locks / Cylinders Anti Theft Device Key Chain: Functional Tool Mounting material Mounting instructionsOptional Accessories:TraX Gear+ Lid Net: The highly flexible net mounts to fixation points inside the lids of the Adventure cases and allows you to store items you wish to have a hand as soon as you open the cases. Size: 37L Case: 12 x 28cm, 45L Case: 20 x28 cmTraX Gear+ Inner Bag: Keep your luggage organised with the padded inner bag. Large carry handles allow for easy removal of the bag from the top case. The bag can be used for any side case with dimensions from 48 x 20 x 33 cm to 48 x 25 x 33 cm. Bag expands via zipTraX Inner Lid Bag: The padded lid inner bag is made from tear-resistant 600D polyster and has different compartments, perfect for storing documents and other personal items you like to have in one place and available reach when you open your TraX caseTraX Expansion Bag: Need more luggage space? Add these waterproof expansion bags, which mount to the top of TraX cases, but also other manufacturer's cases, like BMW. The bags have a carry handle and an inner storage dvider. Size: 45 x 22 x 15 cm, 15 L capacity
TraX Adventure Side Case Sets save you 5-10% in comparison to buying individual componentsAll accessories you need for a side case set-up are included in this kit. You get SW-Motech top of the range TraX Adventure side cases, a set of tough Pro side carriers, key cylinders, fitting kit, anti-theft device and even a key chain, which make a functional little tool.The cases are welded, made from 1.5 mm aluminium and are waterproof. Lids have build in carry handles and tie-down points. Sets are available in black and silver.Features of Pro Side Carriers: Fully removable with newly developed more robust quick-release fasteners Drill Holes enable mounting of Rotopax cells (adapter available separately) Made from 2.5 mm strong steel, constructed for positioning close to the bike For "permanent" mounting, quick-release fastener can be replaced with optional hard bolt kit, which can be ordered via the related product section at the bottom of this screen Black powder coated surface Mounting and demounting happens within seconds due to quick fasteners Rear width with mounted carriers, but without cases: 550 mmFeatures of TraX Adventure Side Cases: Tough and waterproof aluminium case Fiber-Reinforced plastic corners Robot welding and punch riveting prevent moisture ingress Cases are anodized (silver design) or powder coated (black design) against oxidation and abrasion Completely removable lid with quick release fastener 4 tie-down points, integrated into the lid corners Stainless steel latches, anodized aluminium handles Pre-installed mounting rails serve as a strengthening frame Waterproof seal can be replaced Weight: 45 Litre Case: 5.4KG - 37 Litre Case: 5.1KG Dimensions: 45 Litre Case: 49 x 28 x 37 cm - 37 Litre Case: 49 x 23 x 37 cmIncluded: TraX Adventure Side Case 45L Left TraX Adventure Side Case 37L Right Pro Side Carriers Fitting Kit Lid Limiters 6 Locks / Cylinders Anti Theft Device Key Chain: Functional Tool Mounting material Mounting instructionsOptional Accessories:TraX Gear+ Lid Net: The highly flexible net mounts to fixation points inside the lids of the Adventure cases and allows you to store items you wish to have a hand as soon as you open the cases. Size: 37L Case: 12 x 28cm, 45L Case: 20 x28 cmTraX Gear+ Inner Bag: Keep your luggage organised with the padded inner bag. Large carry handles allow for easy removal of the bag from the top case. The bag can be used for any side case with dimensions from 48 x 20 x 33 cm to 48 x 25 x 33 cm. Bag expands via zipTraX Inner Lid Bag: The padded lid inner bag is made from tear-resistant 600D polyster and has different compartments, perfect for storing documents and other personal items you like to have in one place and available reach when you open your TraX caseTraX Expansion Bag: Need more luggage space? Add these waterproof expansion bags, which mount to the top of TraX cases, but also other manufacturer's cases, like BMW. The bags have a carry handle and an inner storage dvider. Size: 45 x 22 x 15 cm, 15 L capacity
All accessories you need for a side case set-up are included in this kit.TEST WINNER in the magazine MOTORRAD issue 05/2020. Test result: VERY GOOD You get SW-Motech top of the range TraX Adventure side cases, a set of tough Pro side carriers, key cylinders, fitting kit, anti-theft device and even a key chain, which make a functional little tool.The cases are welded, made from 1.5 mm aluminium and are waterproof. Lids have build in carry handles and tie-down points. Sets are available in black and silver.Features of Pro Side Carriers: Fully removable with newly developed more robust quick-release fasteners Drill Holes enable mounting of Rotopax cells (adapter available separately) Made from 2.5 mm strong steel, constructed for positioning close to the bike For "permanent" mounting, quick-release fastener can be replaced with optional hard bolt kit, which can be ordered via the related product section at the bottom of this screen Black powder coated surface Mounting and demounting happens within seconds due to quick fasteners Rear width with mounted carriers, but without cases: 510 mmFeatures of TraX Adventure Side Cases: Tough and waterproof aluminium case Fiber-Reinforced plastic corners Robot welding and punch riveting prevent moisture ingress Cases are anodized (silver design) or powder coated (black design) against oxidation and abrasion Completely removable lid with quick release fastener 4 tie-down points, integrated into the lid corners Stainless steel latches, anodized aluminium handles Pre-installed mounting rails serve as a strengthening frame Waterproof seal can be replaced Weight: 45 Litre Case: 5.4KG - 37 Litre Case: 5.1KG Dimensions: 45 Litre Case: 49 x 28 x 37 cm - 37 Litre Case: 49 x 23 x 37 cmIncluded: TraX Adventure Side Case 37L Left TraX Adventure Side Case 45L Right Pro Side Carriers Fitting Kit Lid Limiters 6 Locks / Cylinders Anti Theft Device Key Chain: Functional Tool Mounting material Mounting instructionsOptional Accessories:TraX Gear+ Lid Net: The highly flexible net mounts to fixation points inside the lids of the Adventure cases and allows you to store items you wish to have a hand as soon as you open the cases.Size: 37L Case: 12 x 28cm, 45L Case: 20 x28 cmTraX Gear+ Inner Bag: Keep your luggage organised with the padded inner bag. Large carry handles allow for easy removal of the bag from the top case. The bag can be used for any side case with dimensions from 48 x 20 x 33 cm to 48 x 25 x 33 cm. Bag expands via zipTraX Inner Lid Bag: The padded lid inner bag is made from tear-resistant 600D polyster and has different compartments, perfect for storing documents and other personal items you like to have in one place and available reach when you open your TraX caseTraX Expansion Bag: Need more luggage space? Add these waterproof expansion bags, which mount to the top of TraX cases, but also other manufacturer's cases, like BMW. The bags have a carry handle and an inner storage dvider. Size: 45 x 22 x 15 cm, 15 L capacity
All accessories you need for a side case set-up are included in this kit. TEST WINNER in the magazine MOTORRAD issue 05/2020. Test result: VERY GOOD You get SW-Motech top of the range TraX Adventure side cases, a set of tough Pro side carriers, key cylinders, fitting kit, anti-theft device and even a key chain, which make a functional little tool.The cases are welded, made from 1.5 mm aluminium and are waterproof. Lids have build in carry handles and tie-down points. Sets are available in black and silver.Features of Pro Side Carriers: Fully removable with newly developed more robust quick-release fasteners Drill Holes enable mounting of Rotopax cells (adapter available separately) Made from 2.5 mm strong steel, constructed for positioning close to the bike For "permanent" mounting, quick-release fastener can be replaced with optional hard bolt kit, which can be ordered via the related product section at the bottom of this screen Black powder coated surface Mounting and demounting happens within seconds due to quick fasteners Rear width with mounted carriers, but without cases: 510 mm Features of TraX Adventure Side Cases: Tough and waterproof aluminium case Fiber-Reinforced plastic corners Robot welding and punch riveting prevent moisture ingress Cases are anodized (silver design) or powder coated (black design) against oxidation and abrasion Completely removable lid with quick release fastener 4 tie-down points, integrated into the lid corners Stainless steel latches, anodized aluminium handles Pre-installed mounting rails serve as a strengthening frame Waterproof seal can be replaced Weight: 45 Litre Case: 5.4KG - 37 Litre Case: 5.1KG Dimensions: 45 Litre Case: 49 x 28 x 37 cm - 37 Litre Case: 49 x 23 x 37 cm Included: TraX Adventure Side Case 37L Right TraX Adventure Side Case 45L Left Pro Side Carriers Fitting Kit Lid Limiters 6 Locks / Cylinders Anti Theft Device Key Chain: Functional Tool Mounting material Mounting instructionsOptional Accessories:TraX Gear+ Lid Net: The highly flexible net mounts to fixation points inside the lids of the Adventure cases and allows you to store items you wish to have a hand as soon as you open the cases. Size: 37L Case: 12 x 28cm, 45L Case: 20 x28 cmTraX Gear+ Inner Bag: Keep your luggage organised with the padded inner bag. Large carry handles allow for easy removal of the bag from the top case. The bag can be used for any side case with dimensions from 48 x 20 x 33 cm to 48 x 25 x 33 cm. Bag expands via zipTraX Inner Lid Bag: The padded lid inner bag is made from tear-resistant 600D polyster and has different compartments, perfect for storing documents and other personal items you like to have in one place and available reach when you open your TraX caseTraX Expansion Bag: Need more luggage space? Add these waterproof expansion bags, which mount to the top of TraX cases, but also other manufacturer's cases, like BMW. The bags have a carry handle and an inner storage dvider. Size: 45 x 22 x 15 cm, 15 L capacity
Keep your luggage organized with a TraX Gear+inner bag. Suitable for SW-Motech TraX ION and Adventure side cases, but can also be used for any other side case. The bag can be adjusted to fit both 37 and 45 litres cases via a zipper expansion. Large carrying handles support easy unloading from the side case and allow for it to be used as a carry bag.An additionally integraded smaller pocket can serve as a storage compartment for wallet, phone or documents. The bottom of the bag is fitted with anti-slip material. The luggage can also be used in other cases ranging in size from 48 x 20 x 33 centimeters to 48 x 25 x 33 centimeters (length/width/height). Included in delivery: 1 x TRAX M/L inner bag Details: Material: 600D polyester Color: black Total Weight: appr. 0,6 kg / appr. 1.3 lb Total Volume: 37,0-45,0 l Size: 48 x 20 x 33 cm to 48 x 25 x 33 cm